VistaScan Mini manual - PROFI - dental equipment

More documents

Recommendations

Info

7. Functional layout1 2EN31345671281191012
7.1 Function of individualcomponents1. Image plateThe image plate serves as the exposure mediumfor X-rays and stores the image data.2 Light protection covers• Light protection covers protect the patientfrom infection by contaminated image plates.• Reduces the risk of damage to the imageplate in the patient's mouth.• Protects the image plate from contaminationand dirt.• Prevent image data on the image plate frombeing erased.3. Operational LEDsGeneral information concerning the operatingstate of the appliance is displayed.LED green:ready for operation is displayedLED blue:status of data communication is displayedLED yellow:status of the cleaning operation is displayed4. Cleaning keyPressing the key will set the unit into thecleaning position or return the unit from thecleaning position back into position ready foroperation.5. On / Off keySwitch on: press the On / Off key.Switch off: press the On / Off key for 2 seconds.The appliance shuts down, the green and blueLEDs blink alternately.Complete shut down: press the On / Off keycontinuously until all the LEDs go out.7. CoverCovers the moving parts of the film feed section.This can be removed for cleaning and disinfecting.8. Display (only <strong>VistaScan</strong> <strong>Mini</strong> Plus)This display module presents, depending onthe software used, various information on theappliance status, e.g. in combination with DBS-WIN the patient name, room used or the toothnumber.ENIn the case that an error message isdisplayed, see section on Tips for Operatorsand Service Technician.9. Cover lockUnlocks the cover for opening.10. Film collection trayAfter scanning and erasure the image plates fallinto the detachable film collection tray.11. Interior image transportInside the unit the image plates are transportedthrough the film scanning and film erasure units.12. Feed slotThe film feed slot is where the image plates,inside their opened light protection covers, areplaced so that the film catch takes hold and thefilm is fed to the image plate transport system.13. Storage box withimage plate storage trayAfter taking the image plates from the film deposittray they can be placed in the storage box.6. Status LEDsDisplays information on status of image platetransport.LED red:FaultLED yellow:Image plate transport occupiedLED green:New image plates can be fed in 13
Page 1: VistaScan MiniVistaScan Mini PlusEN
Page 4 and 5: 1. GeneralImportantInformation1.1 N
Page 6 and 7: EN2. Safety2.1 General Safety Notes
Page 8 and 9: 4. Delivery ContentsVistaScan Mini
Page 10 and 11: 5. System requirementsTo operate Vi
Page 14 and 15: 8. Functional DescriptionVistaScan
Page 16 and 17: 10.2 Set-up alternativesTable Set-u
Page 18 and 19: 12.2 X-ray device settingsCheck the
Page 20 and 21: 13.2 Working with image platesImage
Page 22 and 23: 16. Protective coverThe protective
Page 24 and 25: 18.2 X-ray exposuresDanger of infec
Page 26 and 27: ENOperational LEDsOperationalNot re
Page 28 and 29: EN21Status LED is yellow:• Do not
Page 30 and 31: 19. Disinfection andCleaningOnly us
Page 32 and 33: 19.5 VistaScan Mini1.Damage to the
Page 34 and 35: Trouble-shooting21. Tips for Operat
Page 36 and 37: ENProblem Probable cause Solution13
Page 38 and 39: EN21.2 Display error messageProblem
Page 40: DÜRR DENTAL AGHöpfigheimer Strass

VistaScan Mini manual - PROFI - dental equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?