VistaScan Mini manual - PROFI - dental equipment

18.3 Preparing to scan image data17Danger of infection!Wear protective gloves when removingimage plates from the patient's mouth.• Remove the image plate inside its light protectioncover from the patient's mouth.• If the light protection cover or the glovesare considerably dirty, e.g. from blood, thenbefore disinfection the cover must be given aquick dry clean, e.g. by wiping with a cleanpiece of lint.• Clean and disinfect the light protection coverand the gloves with a disinfectant wipe (e.g.Dürr Dental FD 350).Alternatively, use a disinfectant spray (e.g.Dürr FD 322, FD 333) on a soft, fluff-free clothinstead of a disinfectant wipe.• Lay the image plate down in the light protectioncover in the disinfectant wipe.• Take off the protective gloves, disinfect thehands (e.g. with Dürr Dental HD 410) andclean (e.g. with Dürr Dental HD 430, HD 435).ENDamage to the VistaScan MiniBefore handling the image plates,hands should be completely cleanand free of any traces of powderfrom protective gloves.This powder can damage the opticalscanning unit of VistaScan Miniduring the scanning procedure of theimage plate.18 25