Manual - Unvented Gas Log Heater or Vented Decorative Appliance
Manual - Unvented Gas Log Heater or Vented Decorative Appliance
Manual - Unvented Gas Log Heater or Vented Decorative Appliance
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CDVSC7 & CDV7 Series <strong>Gas</strong> FireplaceSECURE FIREPLACE to flo<strong>or</strong> <strong>or</strong> framingThe fireplace must be secured to theflo<strong>or</strong> and/<strong>or</strong> to framing studs as shownin Figure 7. Use two (2) wood screws<strong>or</strong> masonry/ concrete screws to securefireplace to the flo<strong>or</strong>. Use four (4) screwsto attach fireplace to framing. The sidenailing flanges are 1/2" <strong>or</strong> 5/8" to accommodatedifferent wall thickness.FramingNailingFlangeDrywall Supp<strong>or</strong>t Tabs (DoNot Use f<strong>or</strong> Framing <strong>or</strong>Header)ScrewsFramingNailingFlangeScrewScrewNailingFlangesFigure 7 -Securing Fireplace to Flo<strong>or</strong> andFraming Studs (CDVT36 shown)ScrewScrewFP2287Finishing MaterialNOTE: Any wiring (i.e. remote control, wall switch, and optional fan) must be done pri<strong>or</strong> to finalfinishing to avoid costly reconstruction.FP2287secure fireplaceOnly noncombustible materials (i.e. brick, tile, slate, steel, <strong>or</strong> other materials with a UL fire ratingof Zero) may be used to cover the black surface of the appliance. A 300°F minimum adhesivemay be used to attach facing materials to the black surface. If joints between the finished walland the fireplace surround are sealed, a 300°F minimum sealant material (General ElectricRTV103 <strong>or</strong> equivalent) must be used.12 69D3011
Change language