Vashon (Avanti DVS FS) - Avalon

Installation (for qualified installers only) 15! If the vent configuration is installed incorrectly the vent may cause the flames inside the heater to lift orÒghostÓ Ð a dangerous situation. Inspect the flames after installation to insure proper performance. Ifthe vent configuration is correct, yet the flames are lifting or ghosting, shut off gas to the heater andcontact the dealer for information on remedying the problem.Burner PanBurner Ports(consists of slotsand holes)The flames should burn right offthe top of the burner ports (if theyare too blue, adjust the air control).If the flames are lifting, yet thevent configuration is correct,contact your dealer.If the flames are ghosting, yet thevent configuration is correct,contact your dealer.7 Turn the flame adjust knob to its highest position - the flames should be a maximum 9Ó to 10Ó tall.Check the flame on low position. The flames should burn off of each burner hole. If the heater doesnot work correctly, contact your dealer for a remedy.8 Give this manual to the home owner and fully explain the operation of this heater.Travis Industries 93508102 091002