Vashon (Avanti DVS FS) - Avalon

Installation (for qualified installers only) 17Log Set and Coal InstallationPreparing the Glowing Ember:The glowing ember comes in a small strip. Stretchit as thin as possible (nearly transparent) to form a1-1/2Ó by 7-1/2Ó strip.Approximately 7-1/2Ó by 1-1/2ÓPlace the ember strip over the ledge above thefront burner. Half of the strip should hang over theburner.There may be extra material - save it for future use.Place the log set on thelog/kibble plate.Tuck the front of the ember stripdown, behind the burner with ascrewdriver. Make sure the matof ember wool is not over theburner holes. Tuck it behind theburner tube if necessary.Center the log setand slide it all theway to the rear of thefirebox.Note how only a fewÒwhiskersÓ are over theburner holes.Place the kibbles in front of the firebox.Do not place the kibbles directly over theburner holes.Travis Industries 93508102 091002