DLV1280-DX User Manual - Christie Digital Systems

OPERATION• For each projector, select “Tiled Full Width”to fill the videowall from left-to-right whilemaintaining aspect ratio. This typicallycreates a top and bottom black border on thewall, and is best suited for HDTV signals. Seeright.NOTE FOR LARGE ARRAYS: 1) In largearrays having 3 or 4 rows, the center row(s)will automatically fill. 2) Screens with verylittle or no image will be blanked (cropped).• For each projector, select “Tiled Full Height”to fill the videowall from top-to-bottom whilemaintaining the incoming aspect ratio. Thistypically creates a black border on the left andright edges of the wall. See right.NOTE FOR LARGE ARRAYS: 1) In largearrays having 3 or 4 columns/rows, the centerscreen(s) will automatically fill. 2) Screenshaving very little or no image will be blanked(cropped).• For each projector, select “Tiled Anamorphic”to fill the videowall from left-to-right whilemaintaining the incoming “widescreen”(anamorphic) aspect ratio of 16:9. Thistypically creates a black border at the top andbottom edges of the wall. See right.NOTE FOR LARGE ARRAYS: 1) In largearrays having 3 or 4 columns/rows, the centerscreen(s) will automatically fill. 2) Screenshaving very little or no image will be blanked(cropped).Large Displays and 10-bit ProcessingWhen processing sources throughthe optional ADP module, youmay have to crop the extreme topand bottom edges of the imageOR map to fewer screens (seeright).3-50 DLV1280 DX User’s Manual