Installation Manual - Model 5 - Tundra Process Solutions Ltd.
Installation Manual - Model 5 - Tundra Process Solutions Ltd.
Installation Manual - Model 5 - Tundra Process Solutions Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REV C (10-01-10)INSTALLATION MANUAL – D513. Loosen the transducer mounting bracket to feed the chain over the sprockets of thetransducer. When the chain meshes with the sprockets, reattach bracket (see Figure 15).MountingbracketChainFigure 15. Passing the Chain through Transducer Sprockets14. Stretch the chain through the cylinder bracket and around the L-shaped bracket on theother side to install the snap spring into bracket (see Figure 16).L-shapedbracketSnapspringFigure 16. Securing the Snap Spring15. Terminate the base side of the chain by attaching a counterweight (see Figure 17).Counterweightfor chainFigure 17. Terminating Chain with CounterweightSECTION 4 – UNPACKING AND PUMP UNIT PREASSEMBLY14
Change language