Installation Manual - Model 5 - Tundra Process Solutions Ltd.

REV A (05-01-09)INSTALLATION MANUAL – D5Check Tightness of all Bolts and ConnectionsDuring transport and installation of the equipment it is possible that screws and bolts may haveloosened and therefore may result in improper operation of the unit.• Check that all bolts and screws are properly tightened prior to going to the startup phase.• Verify that the motor coupling setscrews are tight. Be sure to reinstall the motor guards afterchecking coupler setscrews.• Verify that all screw connections in the electrical cabinet and in the electrical safety switch boxare tight.• Verify that all fittings and hose connections are tight, including those in the hydraulic cabinet.• Verify all turnbuckles are secured with the locknuts provided.SECTION 5 – INSTALLATION39