Installation Manual - Model 5 - Tundra Process Solutions Ltd.

REV C (10-01-10)INSTALLATION MANUAL – D516. On the other (base) end of the down pipe, secure the counterweight with a bent wire andattach to the back of the pipe (see Figure 18).Figure 18. Securing the Counterweight17. Install the position sensor and bracket assembly to the tension bar (see Figure 19).SensorbracketSensorPositionsensor cableFigure 19. Position Sensor and Sensor Bracket18. Electronically connect the transducer cable (see Figure 20).TransducercableFigure 20. Transducer WiringSECTION 3 – TOOLS & SPECIAL EQUIPMENT15