Understanding Neutron Radiography Reading V-Kodak Part 2 of 3

Care should be taken that none of the adhesive side of the tape is exposed to
the processing solutions. Otherwise, the tape may stick to the processor
rollers or bits of adhesive may be transferred to the rollers, resulting in
processing difficulties. If narrow widths of roll or strip films are being fed, they
should be kept as close as possible to one side guide of the feed tray. This
will permit the feeding of standard-size sheet films at the same time.
Where quantities of roll and strip films are fed, the replenisher pump should
be turned off for a portion of the time. This will prevent overreplenishment and
possible upset of the chemical balance in the processor tanks.
Charlie Chong/ Fion Zhang
Radiography in Modern Industry. Rochester, NY: Eastman Kodak Co. 1980