ITEM TOOLKIT

Chapter 6 FMECA 139
2. Place the block cursor where you would like to add the new block on the system window and click your mouse once.
The new block should appear.
3. Multiple blocks can be added by repeating step 2. To disable the add block mode, select the Release button (B) from
the Toolbar or right click the mouse button.
4. Select the Dialog tab from the viewing window (C).
5. Select a block from the systems window (D).
6. The Dialog view will display all parameters for the selected block. Edit the required fields.
7. The following view is displayed in Dialog View in the Block tab.
Field
Description
Name/ID
Unique Reference Identifier for the Block
Part Number
Block Part Number
Quantity
Block Count defined by the user
Parent Name/ID
Parent Name/ID of the block. Non-editable
No. of Modes
Modes Count for the Block. Non-editable
Circuit Ref.
Circuit Reference / Reference Designator of the Block
Op. Time Factor Operating time factor of the block. 1 means 100%, 0.5 means 50%
LCN
(Logistic Control Number) Internal reference number defined by the user
Description
Additional information to describe the block or function