ITEM TOOLKIT

The Graph Toolbar
Chapter 9 Markov 223
The Graph Toolbar contains commands that affect the appearance and behavior of the Markov diagram. Each selection
highlights the way that States are connected through the Markov System.
Tool Name Description
Edges Entering
Click on the state you wish to select on the Markov, and then click on this symbol to display
the connection line(s) that the selected state is (are) entering from the state close to it. The
connection line(s) will flash repeatedly on the screen.
Edges Leaving
Click on the state you wish to select on the Markov, and then click on this symbol to display
the connection line(s) that is (are) leaving the selected figure and connecting to the next set
of connected states. The connection line will flash repeatedly on the screen.
All
Click on the state you wish to select on the Markov, and then click on this symbol to display
all the connection line(s) to the other figures the selected state is (are) connected to. The
connection line will flash repeatedly on the screen.
Nodes
Connected
From
Nodes
Connected To
Click on this symbol to display the states connected from (leaving) the selected state. The
connected states will flash repeatedly on the screen.
Click on this symbol to display the states connected to (entering) the selected state. The
connected states will flash repeatedly on the screen.
Nodes
Connected
Click on this symbol to display all states that are logically connected within the Markov.
Only connected State symbols will flash on the screen.
Shortcut Keys:
Key
Ctrl + N
Ctrl + O
Ctrl + S
Ctrl + P
Ctrl + X
Ctrl + C
Ctrl + V
Ctrl + W
Del
F1
Function
Open a new project.
Open an existing document. Displays the Open dialog box, in which you can locate and open the
desired file.
Save the active project with its current name. If you have not named the project, the Save As dialog box
will open.
Print the Active View.
Removes selected data from the document and stores it on the clipboard.
Copy the selection to the clipboard.
Paste the contents of the clipboard at the insertion point.
Paste the contents of the clipboard (Gate or Event) at the insertion point as a Repeat Gate or Repeat
Event.
Delete the selection.
Open the ITEM ToolKit On-line Help.