ITEM TOOLKIT

214 ITEM ToolKit Getting Started Guide
38. To add the state to the group, click the Add Selected State to Group button. The list of groups will now show that the
state has been attached. The Remove Selected State from Group button can be used to remove states from the group.
39. Close the dialog by clicking the OK button. The updated group information is shown in the Markov hierarchy in the
lower left corner of the ToolKit window.
40. We continue the example by analyzing the model, and evaluating its results. First, we specify the mission time
interval.
41. Click on the Dialog tab.
42. Set the mission time to 1000 and the number of intermediate points to 100 in the dialog window.
43. Then we start the actual analysis.
44. Switch back to the Markov tab, and start the analysis of the model by clicking the Go button (C) in the toolbar.
C
45. A progress indicator briefly becomes visible. Once the analysis is complete, a notification message appears, stating
that the analysis has completed without errors. The results of the analysis are now ready for viewing.
46. Click the Result Summary button in the toolbar (D). The result summary dialog opens.
47. The table in the Result Summary dialog lists the key results of the Markov analysis.
D