ITEM TOOLKIT

Chapter 13 Reports 287
Inserting a Graphic
One aspect of customizing a report would be to add your company logo or other graphic to the header of the report. This is
easily done, but there are positioning and size limitations. Use the Insert/Remove and Justification buttons at the bottom
of the Header tab to work with graphics.
Use the Insert button to locate the graphic. Typically used file formats are available in the drop-down list. Be sure that the
graphic you are intending on using is small enough to fit within the bounds of the Header area on the report.
Use the Justification button to move the graphic left, center, or right within the header, and top, center, bottom of the
header area. Caution: If you have other information already in the header, it may be covered up by the graphic if they
occupy the same space. You can make small adjustments to the graphic position by using the numeric fields provided.
These settings place the graphic in the upper-right corner of the header. Note in this example that the graphic has covered up
some information. You will need to remove or move those fields of data in the Header tab to solve the issue.