ITEM TOOLKIT

When verifying RBD projects, ToolKit checks for:
Chapter 7 RBD 167
• Circular logic
• Invalid failure mode parameters
• A node termination for each logical path at the system level
• A single logical input and output for each sub-system page
• Failure models inputs to non-sub-system blocks
To verify RBD data:
1. In the System Window, click the system header (A).
2. From the Analysis Menu, select Verify Data (B).
B
C
A
3. If the system contains errors, the Verification Results dialog box (C) displays all relevant error message number and
the message text. Use the information in the Verification Results dialog box to make corrections before performing
system analysis.
4. If no errors are present, the Verification Complete – Without Errors message appears. Click OK.