ITEM TOOLKIT

150 ITEM ToolKit Getting Started Guide
8. Click on Import Phrase (J) and selected the edited and saved Phrase Library (K) in the Open Phrase Library.
9. Click on Open (L) to import the Phrase Library.
10. When you are finished editing phrases, click OK (G) to close the Phrase Library dialog box.
Verifying Data
You must verify system data before performing project analysis. Verifying data before performing an analysis can be a
great time saving feature.
When verifying FMECA projects, ToolKit checks for:
• Component blocks with no failure modes
• Component failure mode apportionment that does not total 100%
• System failure modes with no severity category
• Component blocks with failure rates of zero
• Failure modes with no assigned effects
To verify FMECA data:
1. In the System Window, click the system header.
2. From the Analysis Menu, select Verify Data.
3. If the system contains errors, the Verification Results dialog box displays all relevant error message numbers and the
message text. Use the information in the Verification Results dialog box to make corrections before performing system
analysis.
4. Click on save if you want to print and review all error messages. The following window opens. Click OK to save.