1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
(G) Confirm and change the indoor unit address<br />
IV - 29<br />
4. Service procedures<br />
❏ The purpose of the above function is to let you confirm the indoor unit address<br />
after the auto. address operation, and change the indoor unit address if it is<br />
needed.<br />
a Press the TEST / CHK and ( ) buttons at the same time for more than 4<br />
seconds.<br />
AIR FLOW<br />
UNIT<br />
FLAP<br />
TIMER SET<br />
SET CL<br />
R.C.<br />
CODE No.<br />
ON •<br />
OFF •<br />
MODE<br />
SET TEMP.<br />
FAN SPEED<br />
0362_M_I<br />
b Select the R.C. No. which you want to change with the UNIT (up) or<br />
FLAP (down) buttons.<br />
c Press the SET button (to confirm the R.C. No.).<br />
The smallest registered indoor No. and the selected R.C. No. will be<br />
displayed. Ex:<br />
R.C. No. 3 is selected.<br />
Indoor No. 2 is the smallest indoor No. of<br />
AIR FLOW<br />
the R.C. No. 3.<br />
UNIT<br />
FLAP<br />
TIMER SET<br />
SET CL<br />
UNIT No.<br />
R.C. No.<br />
SETTING<br />
CODE No.<br />
SET DATA<br />
SETTING<br />
SET DATA<br />
ON •<br />
OFF •<br />
TEST / CHK<br />
MODE<br />
SET TEMP.<br />
FAN SPEED<br />
TEST / CHK<br />
0363_M_I<br />
d Select the indoor No. which you want to change with UNIT button. Once in this mode,<br />
the fan motor of selected indoor unit will turn on and let you confirm the indoor<br />
unit address.<br />
1<br />
2<br />
3<br />
4<br />
5
Change language