Guide to configuring eduroam using a Cisco wireless controller Best ...

More documents

Recommendations

Info

student.school.no is the connection to eduroam and forwards authentication to the employee.school.no RADIUS server. The “Employee” RADIUS server is the last in the series and receives authentications it is to use and forwards them. Criteria for “Connection Policies” on the student.school.no RADIUS server: .*@student.school.no – All students, authenticated locally .*@employee.school.no – All employees, sent to the “Employee” RADIUS server .*@.* – All other users, sent to the “Employee” RADIUS server Criteria for Connection Policies on the “Employee” RADIUS server: .*@employee.school.no – All employees, authenticated locally .*@.* – All other users, sent to the eduroam server Select “User-Name” and click on “Add”. Fill in the criteria: for example “.*@student.school.no” specifies that all users who type in username@stuent.school.no shall be authenticated using this policy. Click on “Next” and then “Edit Profile”. On the “Authentication” tab, specify where the authentication request shall be directed: 42 • If one selects “Authenticate request on this server” the user is authenticated on this RADIUS server and the domain of which the user is a member. In that case: • Click on the “Attributes” tab • Select “Attribute: User-Name” and click on “Add” • Under “Find”, type:(.*)@(.*) and under “Replace with”, type: $1 • One may also select “Forward requests to the following remote RADIUS server group for authentication”: the authentication request is then forwarded to one of the server groups created in Step 4. Click on “OK” followed by “Next” and “Apply”.
Create a Connection Request Policy for every connection this RADIUS server is to serve. 43
Page 1 and 2: Guide to configuring eduroam using
Page 3 and 4: Table of Contents Executive Summary
Page 5 and 6: Executive Summary UFS127 is a UNINE
Page 7 and 8: 1 Network planning 1.1 Necessary co
Page 9 and 10: established by means of the Managem
Page 11 and 12: http://www.cisco.com/en/US/tech/tk7
Page 13 and 14: authentication can be completed. He
Page 15 and 16: Management Interface Netmask: 255.2
Page 17 and 18: 3.2 Further configuration via web b
Page 19 and 20: Path: Security → RADIUS → Accou
Page 21 and 22: Under General, the WLAN can be enab
Page 23 and 24: Security Layer 3 shall be “None
Page 25 and 26: What one selects under QoS depends
Page 27 and 28: 3.2.4 Connecting access points Afte
Page 29 and 30: 3.2.5 Further details Once a access
Page 31 and 32: operating and/or the cabling is not
Page 33 and 34: A. Configuration using autonomous a
Page 35 and 36: A.3 RADIUS configuration Go to SECU
Page 37 and 38: B. Configuring Microsoft RADIUS ser
Page 39 and 40: Step 3: Adding clients in IAS The c
Page 41: Step 5: Connection Request Policies
Page 45 and 46: • Click on “OK”, then “Next
Page 47 and 48: User ola.nordmann was granted acces
Page 49 and 50: • Type in a “Friendly Name”
Page 51 and 52: Step 4: Connection Request Policies
Page 53 and 54: Step 5: Network Policies Remote Acc
Page 55 and 56: Step 7: Logging NPS adds log entrie
Page 57 and 58: oot@sirius:~/tmp$ openssl x509 -noo
Page 59 and 60: Glossary CAPWAP Control And Provisi

Guide to configuring eduroam using a Cisco wireless controller Best ...

Create successful ePaper yourself

Delete template?

Save as template?