Forgeabilité des aciers inoxydables austéno-ferritiques

tel-00672279, version 1 - 21 Feb 2012
Bibliography 169
[33] Balancin O, Hoffmann WAM, Jonas JJ. “Influence of microstructure on the flow behaviour of
duplex stainless steels at high temperatures”. Metallurgical and Materials Transactions A-Physical
Metallurgy and Materials Science 2000;31:1353.
[34] Roberti R, Faccoli M, Veronesi C. “Hot deformation behaviour of 2205 duplex stainless
steel”. Duplex Stainless Steels. Grado, Italy, 2007.
[35] Farnoush H, Momeni A, Dehghani K, Mohandesi JA, Keshmiri H. “Hot deformation
characteristics of 2205 duplex stainless steel based on the behaviour of constituent phases”. Materials
& Design 2010;31:220.
[36] Momeni A, Dehghani K. “Hot working behaviour of 2205 austenite-ferrite duplex stainless
steel characterized by constitutive equations and processing maps”. Materials Science and
Engineering A-Structural Materials Properties Microstructure and Processing 2011;528:1448.
[37] Han Y, Zou DN, Chen ZY, Fan GW, Zhang W. “Investigation on hot deformation behaviour of
00Cr23Ni4N duplex stainless steel under medium-high strain rates”. Materials Characterization
2011;62:198.
[38] Spigarelli S, El Mehtedi M, Ricci P, Mapelli C. “Constitutive equations for prediction of the
flow behaviour of duplex stainless steels”. Materials Science and Engineering A-Structural Materials
Properties Microstructure and Processing 2010;527:4218.
[39] Paul A, Martos JL, Sanchez R. “Behaviour of 2205 under hot working conditions”.
Processing, Materials Innovation Stainless Steel. Florence, Italy, 1993. p.297.
[40] Sellars CM, Sah JP, Beynon J, Foster SR. “Plane Strain Compression Testing at elevated
Temperature”. 1976.
[41] McQueen HJ, Ryan ND. “Constitutive analysis in hot working”. Materials Science and
Engineering A-Structural Materials Properties Microstructure and Processing 2002;322:43.
[42] Rupin N. “Déformation à chaud de métaux biphasés : modélisations théoriques et
confrontations expérimentales”. PhD thesis. Laboratoire de Mécanique des Solides. Ecole
Polytechnique, 2007. p.245.
[43] Tendo M, Tadokoro Y, Suetsugu K, Nakazawa T. “Effects of nitrogen, niobium and
molybdenum on strengthening of austenitic stainless steel produced by thermo-mechanical control
process”. Isij International 2001;41:262.
[44] Sandstrom R, Bergqvist H. “Temperature-dependence of tensile properties and
strenghtening of nitrogen alloyed austenitic stainless steel”. Scandinavian Journal of Metallurgy
1977;6:156.
[45] Verlinden B, Cuypers K, Aernoudt E. “Influence of nitrogen content, ferrite/austenite ratio
and grain size on the hot strength of duplex stainless steel”. In: Charles J, Bernhardson S, editors.
Duplex Stainless Steels, vol. 2, 1991. p.711.
[46] Duprez L, De Cooman BC, Akdut N. “Deformation behaviour of duplex stainless steel during
industrial hot rolling”. Steel Research International 2002;73:531.
[47] Al-Jouni FE, Sellars CM. “Hot deformation of two-phase stainless steels”. In: Sorensen B,
Hansen N, Horsewell A, Leffers T, Lilholt H, editors. International Symposium on Metallurgy and
Materials Science. Roskilde, Denemark: Riso National Laboratory, 1983. p.131.
[48] Duprez L, De Cooman BC, Akdut N. “High-temperature stress and strain partitioning in
duplex stainless steel”. Zeitschrift Fur Metallkunde 2002;93:236.
[49] Unckel H. Journal of the Institute of Metals 1937;61.
[50] Hernandez-Castillo LE, Beynon JH, Pinna C, van der Zwaag S. “Micro-scale strain
distribution in hot-worked duplex stainless steel”. Steel Research International 2005;76:137.
[51] Vernusse P. “Comportement mécanique d'un matériau microhétérogène. Application à la
déformation à chaud d'aciers à deux phases ductiles”. PhD thesis. Laboratoire Claude Goux. Ecole
des Mines de Saint-Etienne, 1993.
[52] Muller TLF. “The deformation of duplex alloys”. PhD thesis. Department of Materials science.
The University of Sheffield, 1967.