Forgeabilité des aciers inoxydables austéno-ferritiques

tel-00672279, version 1 - 21 Feb 2012
Bibliography 173
[115] Zhang D, Zhang X, Cheng G. “Compression strain measurement by digital speckle
correlation”. Experimental Mechanics 1999;39:62.
[116] Wang Y, Cuitino AM. “Full-field measurements of heterogeneous deformation patterns on
polymeric foams using digital image correlation”. International Journal of Solids and Structures
2002;39:3777.
[117] Buffiere JY, Maire E, Adrien J, Masse JP, Boller E. “In Situ Experiments with X ray
Tomography: an Attractive Tool for Experimental Mechanics”. Experimental Mechanics 2010;50:289.
[118] Leclerc H, Perie JN, Roux S, Hild F. “Voxel-Scale Digital Volume Correlation”. Experimental
Mechanics 2011;51:479.
[119] Vendroux G, Knauss WG. “Submicron deformation field measurements: Part 1. Developing a
digital scanning tunneling microscope”. Experimental Mechanics 1998;38:18.
[120] Vendroux G, Knauss WG. “Submicron deformation field measurements: Part 2. Improved
digital image correlation”. Experimental Mechanics 1998;38:86.
[121] Vendroux G, Schmidt N, Knauss WG. “Submicron deformation field measurements: Part 3.
Demonstration of deformation determinations”. Experimental Mechanics 1998;38:154.
[122] Schroeter DM, McDowell DL. “Measurement of deformation fields in polycrystalline OFHC
copper”. International Journal of Plasticity 2003;19:1355.
[123] Carbonneau X, Thollet G, Olagnon C, Fantozzi G. “Development of high temperature
extensometric microgrids”. Journal of Materials Science Letters 1997;16:1101.
[124] Soula A. “Etude de la déformation intergranulaire au cours du fluage à haute température
d’un superalliage pour disque de turbine”. ONERA. Grenoble: Institut Polytechnique de Grenoble,
2008. p.199.
[125] Boldetti C. “Multi-scale measurement and modelling of large deformation of structural metals
during thermomechanical processing”. PhD thesis. Department of Mechanical Engineering. The
University of Sheffield, 2006. p.203.
[126] Pinna C, Lan Y. “Local strain measurement in hot deformed microstructures. In: DaFonseca
JQ, editor. 5th International Conference on Advances in Experimental Mechanics”. Manchester,
England, 2007. p.167.
[127] Loveday MS, Mahon GJ, Roebuck B, Lacey AJ, Palmiere EJ, Sellars CM, Van der
Winden MR. “Measurement of flow stress in hot plane strain compression tests”. Materials at High
Temperatures 2006;23:85.
[128] Bornert M. “Morphologie microstructurale et comportement mécanique; caractérisations
expérimentales, approche par bornes et estimations autocohérentes généralisées”. PhD thesis.
Laboratoire de Mécanique des Solides. Ecole Polytechnique, 1996. p.407.
[129] Doumalin P. “Microextensométrie locale par corrélation d'images numériques”. PhD thesis.
Laboratoire de Mécanique des Solides. Ecole Polytechnique, 2000. p.260.
[130] Mirza MS, Sellars CM. “Modelling the hot plane strain compression test Part 2 - Effect of
friction and specimen geometry on spread”. Materials Science and Technology 2001;17:1142.
[131] Mirza MS, Sellars CM. “Modelling the hot plane strain compression test Part I - Effect of
specimen geometry, strain rate, and friction on deformation”. Materials Science and Technology
2001;17:1133.
[132] Beynon JH, Sellars CM. “Strain distribution patterns during plane strain compression”.
Journal of Testing and Evaluation 1985;13:28.
[133] Soppa E, Doumalin P, Binkele P, Wiesendanger T, Bornert M, Schmauder S.
“Experimental and numerical characterisation of in-plane deformation in two-phase materials”.
Computational Materials Science 2001;21:261.
[134] Yerra SK, Martin G, Willemet M, Veron M, Bréchet Y, Fourmentin R, Mithieux JD,
Delannay L, Pardoen T. “A numerical study on damage nucleation of duplex stainless steel”. In:
Charles J, editor. DuplexWorld2010. 13-15 october 2010, Beaune, France, 2010.