Configuration Manual Synchronous Motors 1FT6 - Siemens ...

Technical data 1FT6, rated speed 2500 RPM
��
�����
��
����
������������������
��
����
�� ��
����
����������
�����
��
���
��
���
���������
���� ��
�������������
��
��� � �
����������
�� ��
Motor Description
1.5 Technical data
��� ���� ��
��������
��� ��
���� ��� ��� ��� ������� 7 �� ��� ��� ––– ––– ––– �����
�������������
���� ��� ��� ��� �������� �� �� �� ––– ––– ––– �����
���� ��� ��� ��� �������� �� ��� ��� ––– ––– ––– �����
���� ��� ��� ��� �������� �� ��� ��� ––– ––– ––– �����
���� ��� ��� ��� �������� �� ��� ��� ––– ––– ––– �����
���� ��� ��� ��� �������� �� ��� ��� ––– ––– ––– �����
�����������
Cables are not included in the scope of supply of the motors - they must be separately
ordered.
1) With absolute value encoder (due to the max. temperature of the encoder)
2) Power connector and terminal box mutually exclude one another
3) Motor with terminal boxes, max. cross-section that can be connected, refer to the Table
"Connections for terminal boxes"
4) The electrical shock hazard protection of the power cables depends
on the size of the
selected power module (refer to the Configuration Manual, Drive Converters)
5) Motor with terminal boxes, power and signals cables, refer to Catalog, Chapter
"Connection system MOTION-CONNECT”
6) 6FX8002 = MOTION-CONNECT 800;
6FX5002 = MOTION-CONNECT 500;
Technical data, refer to Catalog, Chapter “Connection system MOTION-CONNECT”
7) Cables can be supplied in integer lengths of precisely 1 meter;
Length code, refer to the Configuration Manual "General Part for Synchronous Motors"
8) For 1FT613⃞ motors, the maximum current and the rated current of the converter must be
carefully observed.
1FT616⃞ motors can only be operated with SIMOVERT MASTERDRIVES MC drive
converters.
1FT6 synchronous motors
Configuration Manual, (PFT6), Edition 12.2004, 6SN1197-0AD12-0BP0 1-11