Configuration Manual Synchronous Motors 1FT6 - Siemens ...
Configuration Manual Synchronous Motors 1FT6 - Siemens ...
Configuration Manual Synchronous Motors 1FT6 - Siemens ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cooling system<br />
Motor Description<br />
1.7 Cooling<br />
A cooling system (i.e. heat exchanger) must be used in order to guarantee a cooling medium<br />
intake temperature of +30°C. It is possible to operate several motors from a single cooling<br />
system. The cooling system is not included in the scope of supply.<br />
Cooling system manufacturer, refer to the Catalog.<br />
The cooling power is calculated from the sum of the power losses of the connected motors.<br />
The power of the pump and the distribution to different cooling circuits should be engineered<br />
corresponding to the specified flow and the pressure losses of the individual cooling circuits.<br />
If one pump is used with distribution to several cooling circuits, then it may be necessary to<br />
use a flow controller.<br />
<strong>1FT6</strong> synchronous motors<br />
<strong>Configuration</strong> <strong>Manual</strong>, (PFT6), Edition 12.2004, 6SN1197-0AD12-0BP0 1-27
Change language