Configuration Manual Synchronous Motors 1FT6 - Siemens ...
Configuration Manual Synchronous Motors 1FT6 - Siemens ...
Configuration Manual Synchronous Motors 1FT6 - Siemens ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Designation of the documentation<br />
Printing history<br />
Brief details of this edition and previous editions are listed below.<br />
The status of each edition is shown by the code in the ”Remarks” column.<br />
Status code in the ”Remarks” column:<br />
A New documentation<br />
B Unrevised reprint with new Order No.<br />
C Revised edition with new status<br />
If factual changes have been made on the page since the last edition, this is indicated by a new edition coding in the header on<br />
that page.<br />
Edition Order No. for <strong>1FT6</strong> Remarks<br />
12.04 6SN1197-0AD12-0BP0 A<br />
Trademarks<br />
SINAMICS ®, SIMOTION ®, SIMATIC ®, SIMATIC HMI ®, SIMATIC NET ®, SIROTEC ®, SINUMERIK ®, SIMODRIVE ®, SIMOVERT<br />
MASTERDRIVES ® and MOTION-CONNECT ® are registered trademarks of <strong>Siemens</strong> AG. Other names in this publication might<br />
be trademarks whose use by a third party for his own purposes may violate the rights of the registered holder.<br />
Further information is available on the Internet under:<br />
http://www.siemens.com/motioncontrol<br />
This publication was produced with SIPS+<br />
© <strong>Siemens</strong> AG 2004. All rights reserved.<br />
The control system may support functions that are not described in<br />
this documentation. However, no claim can be made regarding the<br />
availability of these functions when the equipment is first supplied or<br />
in the event of servicing.<br />
Order No. 6SN1197-0AD07-0BP2<br />
Printed in the Federal Republic of Germany<br />
We have checked that the contents of this document correspond to<br />
the hardware and software described. Nonetheless, differences might<br />
exist and therefore we cannot guarantee that they are completely identical.<br />
The information given in this publication is reviewed at regular intervals<br />
and any corrections that might be necessary are made in the subsequent<br />
printings. Suggestions for improvement are also welcome.<br />
We reserve the right to make technical changes.<br />
<strong>Siemens</strong>–Aktiengesellschaft