z/VM: CP Commands and Utilities Reference - z/VM - IBM

SPXTAPE
HCP1901E vdev_field is not a valid virtual device
number or range; use 'vdev' or
'vdev1-vdev2'
HCP1902E Virtual device vdev1[-vdev2] not
attached
HCP1903E Virtual device vdev1[-vdev2] not
supported for SPXTAPE
HCP1904E Virtual device vdev1[-vdev2] not active
HCP1905E Virtual device vdev1[-vdev2] is not
valid; vdev3 is already active with
SPXTAPE {DUMP|LOAD|SCAN}
HCP1906E File {userid|*IMG|*NLS|*NSS|*UCR}
spoolid2 (was spoolid1 on tape) has
been purged because {spool space is
full|the tape was canceled}
HCP1907E File {userid|*IMG|*NLS|*NSS|*UCR}
spoolid2 (was spoolid1 on tape) has
been purged because of a DASD error.
The file can be recovered by reloading
it from tape
HCP1908E File {userid|*IMG|*NLS|*NSS|*UCR}
spoolid2 (was spoolid1 on tape) has
been {placed in system hold
status|purged} because it was partially
loaded. One or more tapes containing
parts of the file were not loaded
HCP1909E File dumped as userid1 spoolid1 has
been loaded to userid2 as file spoolid2
HCP1910E File {userid|*IMG|*NLS|*NSS|*UCR}
spoolid2 (was spoolid1 on tape) was
partly loaded and then purged because
of a tape read I/O error
HCP1911W Tape on virtual device vdev not
positioned at beginning-of-tape or after
a tape mark. Attempting to process
anyway
HCP1912E Tape on virtual device vdev not
positioned at beginning-of-tape or after
a tape mark. Device vdev has been
canceled
1480 z/VM: CP Commands and Utilities Reference
HCP1913I SPXTAPE selection criteria includes
system data files that will not be
purged
HCP1914E Virtual device vdev1[-vdev2] not
write-enabled
HCP1915E Operands beginning with operand
conflict with an active SPXTAPE
command
HCP1916I File userid queue spoolid matches the
SPXTAPE selection criteria but could
not be dumped
HCP1917E Tape device(s) {rdev[-rdev]|vdev[-vdev]}
attached MULTIUSER.
HCP6525E External Security Manager is
unavailable.