z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY CPXLOAD
Notes:
1. Private control sections (CSECTs) do not have names. If one was
loaded, you will see “P/C” listed as the name of the entry point or
external symbol. For example:
Associated entry points and external symbols:
PVC0CAEA is at 14217208
PVCE3348 is at 142179CC
PVCF3D2E is at 14217D48
P/C is at 14217000 module size is 000E08
2. The addresses displayed are host logical addresses. See Usage Note 4
on page 752 for information on determining the host real address that is
associated with a host logical address.
Response 2 (Display by Entry Point Name):
To display information about all the customer-written CP routines that have entry
points and external symbols that start with a 4-character string of “MINE”, enter the
following:
query cpxload epname mine*
Loaded as identifier 14
File: LCLCMDS TEXT B
Loaded by: SYSTEM on 12/28/95 at 12:12:02
CPXLOAD options: MP CONTROL DELAY LET PERMANENT
Associated entry points and external symbols:
MINEENTR is at 078E0700
MINEDATA is at 078E0174
MINETABL is at 078E0000 module size is 000C00
Loaded as identifier 32
File: LCLDIAG TEXT B
Loaded by: SYSTEM on 12/28/95 at 23:48:36
CPXLOAD options: MP CONTROL DELAY LET PERMANENT
Associated entry points and external symbols:
MINE0C4 is at 078DF772
MINE0C6 is at 078DF99C
MINESECT is at 078DF000 module size is 000EF8
Ready;
Response 3 (Display by User ID):
To display information about all the customer-written CP routines that were loaded
after initialization by user MAINT, enter the following:
query cpxload userid maint
Loaded as identifier 4
File: HRH CONTROL B
Loaded by: MAINT on 12/18/95 at 21:57:03
CPXLOAD options: MP CONTROL NODELAY NOLET TEMPORARY
Associated entry points and external symbols:
HRD0CAEA is at 0621F208
HR4E3348 is at 0621F9CC
HR8F3D2E is at 0621FD48
HR6438C8 is at 0621F000 module size is 000E08
Loaded as identifier 7
File: ABEND TEXT R
Loaded by: MAINT on 12/21/95 at 02:13:59
CPXLOAD options: MP CONTROL NODELAY NOLET PERMANENT
Associated entry points and external symbols:
ADENDEP is at 0B760028
ABEND is at 0B760000 module size is 000048
Ready;
Response 4 (Display All):
754 z/VM: CP Commands and Utilities Reference