z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY MONITOR
USERS CONNECTED TO *MONITOR
lists, in alphabetic order, the user IDs of the users connected to *MONITOR to
collect SAMPLE data.
NO USERS CONNECTED
indicates that no user is connected to *MONITOR to collect sample data.
userid
identifies the users connected to *MONITOR for SAMPLE data.
QUIESCED
indicates that the user is not allowing *MONITOR to send IUCV messages
over this path to his or her virtual machine.
PROCESSING-CONFIG
indicates that the user received the notification for the configuration send,
but that he or she has not yet replied to the send.
PENDING-CONFIG
indicates that the user is waiting for a configuration notification message.
The user is not eligible for data notification until after a configuration
message has been successfully sent.
Note: If a user’s path is at the IUCV message limit, the user remains
quiesced) until the user responds to previous messages from
*MONITOR.
EXCLUSIVE
indicates that monitor is running in exclusive mode, not shared mode. The
mode is specified by the format of the connect interface used by the first
user that connects to *MONITOR.
The following additional response lines are given based on the specifications in the
sample profile:
MONITOR DOMAIN ENABLED
SYSTEM DOMAIN ENABLED
PROCESSOR DOMAIN {DISABLED}
{ENABLED }
STORAGE DOMAIN {DISABLED}
{ENABLED }
USER DOMAIN {DISABLED}
{ENABLED }
Note: The following additional responses are issued only if the USER domain is
enabled, based on the specifications for the USER domain in the sample
profile:
ALL USERS ENABLED
- or -
ALL USERS EXCEPT:
userid [userid...]
- or -
THE FOLLOWING USERIDS ARE ENABLED:
userid [userid...]
I/O DOMAIN {DISABLED}
{ENABLED }
886 z/VM: CP Commands and Utilities Reference
Note: The following additional responses are issued only if the I/O domain is
enabled, based on the specifications for the I/O domain in the sample profile: