z/VM: CP Commands and Utilities Reference - z/VM - IBM

mnem The mnemonic for an instruction.
code An interrupt code number in hexadecimal.
name An interrupt name (for example, operation, addressing).
CC n The condition code number (0, 1, 2, or 3).
Note: The condition code will not always be displayed.
Gnn A general register with altered contents.
cccccccc
cccccccccccccccc
cccccccc_cccccccc
The address generated and loaded by a LOAD ADDRESS or LOAD
ADDRESS EXTENDED instruction. 2
ss A status byte.
FSA=nnnnnnnn
FSA=nnnnnnnnnnnnnnnn
FSA=nnnnnnnn_nnnnnnnn
The failing storage address if valid. If it is not valid, nothing is
shown. 2
zz An altered byte of an EXECUTE instruction, formed by
inclusive-ORing the low byte of R1 with the second byte of the
executed instruction.
*** A prefix indicating virtual machine interrupt.
-> As a prefix indicating transfer of control, this symbol is present at
the beginning of a line whenever the displayed instruction does not
immediately follow the last instruction displayed. As a suffix for a
successful branch instruction, it precedes the address being
transferred to.
>> An indication of storage alteration, followed by the operand
address.
- A suffix used on storage operand addresses to indicate that the
address being displayed is one byte past the end of the storage
altered by the instruction.
= A prefix used with LOAD ADDRESS or LOAD ADDRESS
EXTENDED to show that the actual data is shown rather than
computing the operand address by base and displacement.
ARareg An access register with altered contents.
TRACE: Command Responses
SPACEowner:space_name
identifies the owner’s user ID and the name of the address space in
which the trace event occurred. It is displayed only for XC virtual
machines.
ASITasit identifies the address space identification token of the address
space in which the trace event occurred. It is displayed only for XC
virtual machines.
For operation codes that represent two mnemonics, the mnemonic for fixed-point
operations is shown. The following is a list of those operation codes with the
mnemonic to be returned by CP:
Chapter 2. CP Commands 1611