28.12.2012 Views

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Remote Commands of <strong>the</strong> 1xEV-DO BTS Analyzer Option (K84) R&S <strong>ZVL</strong>‑<strong>K1</strong><br />

RHO RHO value <strong>for</strong> <strong>the</strong> selected channel type/slot<br />

RHOData RHO over all slots <strong>for</strong> <strong>the</strong> DATA area<br />

RHOMac RHO over all slots <strong>for</strong> <strong>the</strong> MAC area<br />

RHOPilot RHO over all slots <strong>for</strong> <strong>the</strong> pilot area<br />

RHO1 RHOoverall–1 over all slots over all chips with<br />

start of averaging at <strong>the</strong> half–slot limit<br />

RHO2 RHOoverall–2 over all slots over all chips with<br />

start of averaging at <strong>the</strong> quarter–slot limit<br />

SFACtor spreading factor of <strong>the</strong> channel<br />

SRATe symbol rate in ksps<br />

TFRame trigger to frame in sec<br />

TOFFset timing offset in s<br />

The Trigger to Frame value (TFRame) supplies a '9' if <strong>the</strong> trigger is at Free Run.<br />

The Timing/Phase Offset values (TOFFset/POFFset) supply a '9' if timing and phase<br />

measurement is disabled (refer to CDP:TPM) or <strong>the</strong> number of active channels is<br />

higher than 50.<br />

Example<br />

CALC:MARK:FUNC:CDP:RES? CDP<br />

Reads out total power.<br />

Characteristics<br />

RST value: -<br />

SCPI: device-specific<br />

Mode<br />

EVDO<br />

1303.6573.42 4.622 E-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!