28.12.2012 Views

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CALCulate:MARKer Subsystem (WLAN, K91 / K91n) R&S <strong>ZVL</strong>‑<strong>K1</strong><br />

CALCulate:MARKer:FUNCtion Subsystem (WLAN, K91 / K91n)<br />

The measurement window is selected by CALCulate 1 (screen A) or 2 (screen B).<br />

Commands of <strong>the</strong> CALCulate:MARKer:FUNCtion Subsystem<br />

– CALCulate:MARKer:FUNCtion:POWer:RESult[:CURRent]?<br />

– CALCulate:MARKer:FUNCtion:POWer:RESult:MAXHold?<br />

– CALCulate:MARKer:FUNCtion:ZOOM<br />

CALCulate:MARKer:FUNCtion:POWer:RESult[:CURRent]?<br />

This command queries <strong>the</strong> current result values of <strong>the</strong> adjacent channel power measurement.<br />

An ACPR (Adjacent channel power relative) measurement must have previously been run, <strong>for</strong><br />

<strong>the</strong>re to be summary data available.<br />

Results are output separated by commas in <strong>the</strong> following order:<br />

– Power of main channel<br />

– Power of lower adjacent channel<br />

– Power of upper adjacent channel<br />

– Power of lower alternate adjacent channel 1<br />

– Power of upper alternate adjacent channel 1<br />

– Power of lower alternate adjacent channel 2<br />

– Power of upper alternate adjacent channel 2<br />

Adjacent channel power values are output in dB.<br />

This command is a query only and thus has no *RST value.<br />

Example<br />

CALC:MARK:FUNC:POW:RES?<br />

Characteristics<br />

*RST value: –<br />

SCPI: device–specific<br />

Mode<br />

WLAN<br />

CALCulate:MARKer:FUNCtion:POWer:RESult:MAXHold?<br />

This command queries <strong>the</strong> maximum result values of <strong>the</strong> adjacent channel power<br />

measurement. An ACPR (Adjacent channel power relative) measurement must have previously<br />

been run with more than one sweep, <strong>for</strong> <strong>the</strong>re to be maximum summary data available.<br />

For details on <strong>the</strong> output refer to<br />

"CALCulate:MARKer:FUNCtion:POWer:RESult[:CURRent]?" on page 4.676.<br />

This command is a query only and thus has no *RST value.<br />

Example<br />

CALC:MARK:FUNC:POW:RES:MAXH?<br />

Characteristics<br />

*RST value: –<br />

SCPI: device–specific<br />

1303.6573.42 4.676 E-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!