Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

More documents

Recommendations

Info

R&S ZVL-K1 WiMAX, WiBro Measurements (Option K93) Uplink (UL) (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Displays the channel estimation performed for uplink signals. This field is for information purposes only as channel estimation for uplink signals are always performed in payload only (payload comprises pilots and data). Modulation Analysis Scope (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Displays the modulation formats to be analyzed. This field is for information purposes only as all detected modulation schemes are analyzed. Demodulator (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Displays the modulation scheme detected in the analyzed signal. For signals using multiple modulation schemes, the modulation scheme with the highest data rate is displayed. The field also indicates the limits that are applied to the EVM results in the table or results. This field is for information purposes only. � Remote: DEM:FORM:BAN? Pilots for Tracking DL (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies how, for downlink signals, the pilot sequence is determined for tracking purposes. According to Standard The pilot sequence is computed according to the standard. Detected The pilot sequence uses the values detected in the signal. � Remote: TRAC:PIL DET Pilots for Tracking UL (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Displays how, for uplink signals, the pilot sequence is determined for tracking purposes. This field is for information purposes only as tracking is performed according to the selected standard. FFT start offset rel to CP center (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Adds an offset to the FFT starting point determined by the application. The setting range is from –100% to +100% of the cyclic prefix (CP) length. In the case of 0%, the optimal FFT starting point, determined by the application, is used. This is the default setting. � Remote: FFT:OFF 0 File Name (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Displays the name of the loaded *.WIMAX settings file. If no file is loaded the '….' is displayed. This field is for information purposes only. 1303.6573.42 3.433 E-5
WiMAX, WiBro Measurements (Option K93) R&S ZVL-K1 IDCell (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies the downlink IDCell number and affects the definition of the preamble sequence (in conjunction with the used segments according to the Used Subchannel Bitmap setting), the pilot sequence of the first zone and the subchannel definition of the first zone. � Remote: CONF:WIM:DLSF:IDC 0 Preamble Mode (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies how the preamble index is calculated. Auto The preamble index is automatically calculated according to the IDCell and Used Subchannel Bitmap parameters. User The preamble index can be specified manually, i.e. the preamble pattern is chosen according to the standard using the Preamble Index parameter. � Remote: CONF:WIM:DLSF:PRE:MODE AUTO Preamble Index (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies the preamble pattern (according to the standard) to be used, if the Preamble Mode parameter is set to User. � Remote: CONF:WIM:DLSF:PRE:IND 31 Used Subchannel Bitmap (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Assigns subchannel groups to segments, see [802.16e–2005], page 360, table 268a "Subchannel index of the six subchannel groups". This table defines how many subchannels are available for the Burst List (Frame Config tab) belonging to the corresponding segment of a DL–PUSC zone (with Use All Subchannels being false). In the burst list – corresponding to the segment – this selection controls the height of the white area in the burst map. � Remote: CONF:WIM:DLSF:SEGM1 63 Frame Number (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies the number of the frame to be analyzed. For UL subframe analysis, the frame number must be constant for the signal to be analyzed. � Remote: CONF:WIM:ULSF:FRAM 0 Allocated Subchannel Bitmap (Demod Settings dialog box, IEEE 802.16e–2005 OFDMA/WiBro) Specifies the subchannels to be analyzed. This parameter is for information purposes only as all subchannels are used in the UL subframe. 1303.6573.42 3.434 E-5
Page 1 and 2:
R&S ® R&S ZVL-K1 Spectrum Analysis
Page 3 and 4:
R&S ZVL-K1 Conventions Used in the
Page 6 and 7:
R&S ZVL-K1 Introduction 1 Introduct
Page 8 and 9:
R&S ZVL-K1 Introduction Spectrum An
Page 10 and 11:
R&S ZVL-K1 Introduction WLAN OFDM A
Page 12 and 13:
Advanced Measurement ExamplesTest S
Page 14 and 15:
Advanced Measurement ExamplesTest S
Page 16 and 17:
Measurement of Harmonics R&S ZVL-K1
Page 18 and 19:
Measurement of Harmonics R&S ZVL-K1
Page 20 and 21:
Measuring the Spectra of Complex Si
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Measuring Signals in the Vicinity o
Page 28 and 29:
Measuring Signals in the Vicinity o
Page 30 and 31:
Noise Measurements R&S ZVL-K1 5. Th
Page 32 and 33:
Noise Measurements R&S ZVL-K1 Measu
Page 34 and 35:
Noise Measurements R&S ZVL-K1 Pi =
Page 36 and 37:
Noise Measurements R&S ZVL-K1 2. Se
Page 38 and 39:
Measurements on Modulated Signals R
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Bluetooth Measurements (Option K8)
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Cable TV Measurements (Option K20)
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Noise Figure Measurements Option (K
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
3GPP Base Station Measurements (Opt
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
CDMA2000 Base Station Measurements
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
WLAN TX Measurements (Option K91 /
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
WiMAX, WiBro Measurements (Options
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172:
R&S ZVL-K1 Measurement Parameters C
Page 175 and 176:
Measurement Parameters R&S ZVL-K1 M
Page 177 and 178:
Initializing the Configuration - PR
Page 179 and 180:
Selecting the Frequency and Span -
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Setting the Frequency Span - SPAN K
Page 187 and 188:
Setting the Level Display & Configu
Page 189 and 190:
Setting the Level Display & Configu
Page 191 and 192:
Setting the Bandwidths and Sweep Ti
Page 193 and 194:
Setting the Bandwidths and Sweep Ti
Page 195 and 196:
Configuring the Sweep Mode - SWEEP
Page 197 and 198:
Configuring the Sweep Mode - SWEEP
Page 199 and 200:
Triggering the Sweep - TRIG / FORMA
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Setting Traces - TRACE Key R&S ZVL-
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Using Markers and Delta Markers - M
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Changing Settings via Markers - MKR
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Power Measurements - MEAS Key R&S Z
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Using Limit Lines and Display Lines
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Measurement Mode Selection - MODE K
Page 295 and 296:
Models and Options R&S ZVL-K1 Model
Page 297 and 298:
Analog Demodulation (Option K7) R&S
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Power Meter (Option K9) R&S ZVL-K1
Page 343 and 344:
Power Meter (Option K9) R&S ZVL-K1
Page 345 and 346:
Spectrogram Measurement (Option K14
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
CDMA2000 BTS Analyzer (Option K82)
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
1xEV-DO BTS Analyzer (Option K84) R
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Channel Type 1xEV-DO BTS Analyzer (
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556: WLAN TX Measurements (Option K91 /
Page 587 and 588: WiMAX, WiBro Measurements (Option K
Page 605: WiMAX, WiBro Measurements (Option K
Page 637 and 638: General Settings, Printout and Inst
Page 639 and 640: Instrument Setup and Interface Conf
Page 657 and 658:
Saving and Recalling Settings Files
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Page 665 and 666:
Manual Operation - Local Menu R&S Z
Page 667 and 668:
Measurement Documentation - PRINT K
Page 669 and 670:
R&S ZVL-K1 Remote Control - Command
Page 671 and 672:
R&S ZVL-K1 Remote Control - Command
Page 673 and 674:
R&S ZVL‑K1 Notation 4 Remote Cont
Page 675 and 676:
R&S ZVL‑K1 Notation Upper/Lower C
Page 677 and 678:
R&S ZVL‑K1 Remote Commands of the
Page 679 and 680:
R&S ZVL‑K1 Common Commands *ESR?
Page 681 and 682:
R&S ZVL‑K1 Common Commands *TRG *
Page 683 and 684:
R&S ZVL‑K1 CALCulate Subsystem CA
Page 685 and 686:
R&S ZVL‑K1 CALCulate Subsystem Ch
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
R&S ZVL‑K1 CALCulate Subsystem (C
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
R&S ZVL‑K1 CALCulate Subsystem Pa
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
R&S ZVL‑K1 CALCulate Subsystem Th
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
R&S ZVL‑K1 CALCulate Subsystem Mo
Page 743 and 744:
Page 745 and 746:
R&S ZVL‑K1 CALCulate Subsystem If
Page 747 and 748:
R&S ZVL‑K1 CALCulate Subsystem Ex
Page 749 and 750:
Page 751 and 752:
Page 753 and 754:
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
R&S ZVL‑K1 CALCulate Subsystem ch
Page 761 and 762:
R&S ZVL‑K1 CALCulate Subsystem PO
Page 763 and 764:
Page 765 and 766:
Page 767 and 768:
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
Page 779 and 780:
Page 781 and 782:
Page 783 and 784:
R&S ZVL‑K1 CALCulate Subsystem Mo
Page 785 and 786:
Page 787 and 788:
Page 789 and 790:
Page 791 and 792:
R&S ZVL‑K1 CALibration Subsystem
Page 793 and 794:
R&S ZVL‑K1 DIAGnostic Subsystem "
Page 795 and 796:
R&S ZVL‑K1 DIAGnostic Subsystem D
Page 797 and 798:
R&S ZVL‑K1 DISPlay Subsystem CMAP
Page 799 and 800:
R&S ZVL‑K1 DISPlay Subsystem Exam
Page 801 and 802:
R&S ZVL‑K1 DISPlay Subsystem DISP
Page 803 and 804:
R&S ZVL‑K1 DISPlay Subsystem DISP
Page 805 and 806:
R&S ZVL‑K1 DISPlay Subsystem The
Page 807 and 808:
R&S ZVL‑K1 FORMat Subsytem FORMat
Page 809 and 810:
R&S ZVL‑K1 HCOPy Subsystem HCOPy[
Page 811 and 812:
R&S ZVL‑K1 HCOPy Subsystem Exampl
Page 813 and 814:
R&S ZVL‑K1 HCOPy Subsystem HCOPy:
Page 815 and 816:
R&S ZVL‑K1 INITiate Subsystem INI
Page 817 and 818:
R&S ZVL‑K1 INITiate Subsystem Exa
Page 819 and 820:
R&S ZVL‑K1 INPut Subsystem Charac
Page 821 and 822:
R&S ZVL‑K1 INSTrument Subsystem I
Page 823 and 824:
R&S ZVL‑K1 MMEMory Subsystem - MM
Page 825 and 826:
R&S ZVL‑K1 MMEMory Subsystem Mode
Page 827 and 828:
R&S ZVL‑K1 MMEMory Subsystem MMEM
Page 829 and 830:
R&S ZVL‑K1 MMEMory Subsystem MMEM
Page 831 and 832:
R&S ZVL‑K1 MMEMory Subsystem Char
Page 833 and 834:
R&S ZVL‑K1 MMEMory Subsystem Exam
Page 835 and 836:
R&S ZVL‑K1 MMEMory Subsystem Mode
Page 837 and 838:
R&S ZVL‑K1 OUTPut Subsystem OUTPu
Page 839 and 840:
R&S ZVL‑K1 SENSe Subsystem AVER:S
Page 841 and 842:
R&S ZVL‑K1 SENSe Subsystem SENSe:
Page 843 and 844:
R&S ZVL‑K1 SENSe Subsystem Exampl
Page 845 and 846:
Page 847 and 848:
R&S ZVL‑K1 SENSe Subsystem [SENSe
Page 849 and 850:
R&S ZVL‑K1 SENSe Subsystem Mode A
Page 851 and 852:
Page 853 and 854:
Page 855 and 856:
R&S ZVL‑K1 SENSe Subsystem Parame
Page 857 and 858:
Page 859 and 860:
Page 861 and 862:
R&S ZVL‑K1 SENSe Subsystem Mode A
Page 863 and 864:
Page 865 and 866:
R&S ZVL‑K1 SENSe Subsystem Return
Page 867 and 868:
R&S ZVL‑K1 SENSe Subsystem Possib
Page 869 and 870:
Page 871 and 872:
Page 873 and 874:
R&S ZVL‑K1 SENSe Subsystem trigge
Page 875 and 876:
Page 877 and 878:
Page 879 and 880:
R&S ZVL‑K1 SENSe Subsystem Parame
Page 881 and 882:
Page 883 and 884:
Page 885 and 886:
Page 887 and 888:
Page 889 and 890:
Page 891 and 892:
Page 893 and 894:
R&S ZVL‑K1 STATus Subsystem STATu
Page 895 and 896:
Page 897 and 898:
R&S ZVL‑K1 STATus Subsystem - STA
Page 899 and 900:
Page 901 and 902:
R&S ZVL‑K1 STATus Subsystem Mode
Page 903 and 904:
R&S ZVL‑K1 STATus Subsystem Examp
Page 905 and 906:
Page 907 and 908:
R&S ZVL‑K1 STATus Subsystem Mode
Page 909 and 910:
R&S ZVL‑K1 SYSTem Subsystem SYSTe
Page 911 and 912:
R&S ZVL‑K1 SYSTem Subsystem Examp
Page 913 and 914:
R&S ZVL‑K1 SYSTem Subsystem Chara
Page 915 and 916:
Page 917 and 918:
Page 919 and 920:
R&S ZVL‑K1 TRACe Subsystem limit
Page 921 and 922:
R&S ZVL‑K1 TRACe Subsystem The tr
Page 923 and 924:
R&S ZVL‑K1 TRACe Subsystem Instru
Page 925 and 926:
R&S ZVL‑K1 TRACe Subsystem Sample
Page 927 and 928:
R&S ZVL‑K1 TRACe Subsystem Exampl
Page 929 and 930:
R&S ZVL‑K1 TRACe Subsystem # of S
Page 931 and 932:
R&S ZVL‑K1 TRIGger Subsystem TRIG
Page 933 and 934:
R&S ZVL‑K1 TRIGger Subsystem Char
Page 935 and 936:
R&S ZVL‑K1 TRIGger Subsystem TRIG
Page 937 and 938:
R&S ZVL‑K1 UNIT Subsystem UNIT Su
Page 939 and 940:
R&S ZVL‑K1 CALCulate Subsystem (A
Page 941 and 942:
Page 943 and 944:
Page 945 and 946:
Page 947 and 948:
Page 949 and 950:
Page 951 and 952:
R&S ZVL‑K1 DISPlay Subsystem (Ana
Page 953 and 954:
R&S ZVL‑K1 SENSe Subsystem (Analo
Page 955 and 956:
Page 957 and 958:
Page 959 and 960:
Page 961 and 962:
Page 963 and 964:
Page 965 and 966:
Page 967 and 968:
Page 969 and 970:
Page 971 and 972:
Page 973 and 974:
Page 975 and 976:
Page 977 and 978:
Page 979 and 980:
Page 981 and 982:
Page 983 and 984:
R&S ZVL‑K1 TRIGger Subsystem (Ana
Page 985 and 986:
R&S ZVL‑K1 UNIT Subsystem (Analog
Page 987 and 988:
R&S ZVL‑K1 CALCulate:BTOoth Subsy
Page 989 and 990:
Page 991 and 992:
Page 993 and 994:
Page 995 and 996:
Page 997 and 998:
Page 999 and 1000:
Page 1001 and 1002:
Page 1003 and 1004:
Page 1005 and 1006:
Page 1007 and 1008:
R&S ZVL‑K1 CALCulate:DELTamarker
Page 1009 and 1010:
R&S ZVL‑K1 CONFigure:BTOoth Subsy
Page 1011 and 1012:
Page 1013 and 1014:
Page 1015 and 1016:
Page 1017 and 1018:
Page 1019 and 1020:
Page 1021 and 1022:
Page 1023 and 1024:
R&S ZVL‑K1 DISPlay Subsystem (BLU
Page 1025 and 1026:
R&S ZVL‑K1 SENSe Subsystem (BLUET
Page 1027 and 1028:
Page 1029 and 1030:
Page 1031 and 1032:
Page 1033 and 1034:
R&S ZVL‑K1 CALCulate Subsystem (P
Page 1035 and 1036:
R&S ZVL‑K1 CALCulate Subsystem (P
Page 1037 and 1038:
R&S ZVL‑K1 FETCh Subsystem (Power
Page 1039 and 1040:
R&S ZVL‑K1 SENSe Subsystem (Power
Page 1041 and 1042:
Page 1043 and 1044:
Page 1045 and 1046:
R&S ZVL‑K1 UNIT Subsystem (Power
Page 1047 and 1048:
R&S ZVL‑K1 CALCulate Subsystem (S
Page 1049 and 1050:
Page 1051 and 1052:
Page 1053 and 1054:
Page 1055 and 1056:
Page 1057 and 1058:
Page 1059 and 1060:
Page 1061 and 1062:
Page 1063 and 1064:
Page 1065 and 1066:
R&S ZVL‑K1 MMEMory Subsystem (SPE
Page 1067 and 1068:
R&S ZVL‑K1 TRACe Subsystem (SPECM
Page 1069 and 1070:
Page 1071 and 1072:
Page 1073 and 1074:
Page 1075 and 1076:
Page 1077 and 1078:
Page 1079 and 1080:
Page 1081 and 1082:
Page 1083 and 1084:
Page 1085 and 1086:
Page 1087 and 1088:
Page 1089 and 1090:
Page 1091 and 1092:
Page 1093 and 1094:
Page 1095 and 1096:
Page 1097 and 1098:
Page 1099 and 1100:
Page 1101 and 1102:
Page 1103 and 1104:
Page 1105 and 1106:
Page 1107 and 1108:
Page 1109 and 1110:
Page 1111 and 1112:
Page 1113 and 1114:
Page 1115 and 1116:
Page 1117 and 1118:
Page 1119 and 1120:
Page 1121 and 1122:
Page 1123 and 1124:
Page 1125 and 1126:
Page 1127 and 1128:
R&S ZVL‑K1 CONFigure Subsystem (C
Page 1129 and 1130:
Page 1131 and 1132:
R&S ZVL‑K1 DISPlay Subsystem (CAT
Page 1133 and 1134:
Page 1135 and 1136:
Page 1137 and 1138:
R&S ZVL‑K1 INITiate Subsystem (CA
Page 1139 and 1140:
R&S ZVL‑K1 INSTrument Subsystem (
Page 1141 and 1142:
R&S ZVL‑K1 SENSe Subsystem (CATV,
Page 1143 and 1144:
Page 1145 and 1146:
Page 1147 and 1148:
Page 1149 and 1150:
Page 1151 and 1152:
Page 1153 and 1154:
Page 1155 and 1156:
Page 1157 and 1158:
Page 1159 and 1160:
Page 1161 and 1162:
Page 1163 and 1164:
Page 1165 and 1166:
Page 1167 and 1168:
R&S ZVL‑K1 SETup:TV Subsystem (CA
Page 1169 and 1170:
R&S ZVL‑K1 STATus Subsystem (CATV
Page 1171 and 1172:
R&S ZVL‑K1 STATus Subsystem (CATV
Page 1173 and 1174:
R&S ZVL‑K1 TRACe Subsystem (CATV,
Page 1175 and 1176:
R&S ZVL‑K1 TRIGger Subsystem (CAT
Page 1177 and 1178:
R&S ZVL‑K1 UNIT Subsystem (CATV,
Page 1179 and 1180:
R&S ZVL‑K1 ABORt Subsystem (Noise
Page 1181 and 1182:
R&S ZVL‑K1 CALCulate Subsystem (N
Page 1183 and 1184:
Page 1185 and 1186:
Page 1187 and 1188:
Page 1189 and 1190:
R&S ZVL‑K1 CONFigure Subsystem (N
Page 1191 and 1192:
R&S ZVL‑K1 DISPlay Subsystem (Noi
Page 1193 and 1194:
Page 1195 and 1196:
Page 1197 and 1198:
R&S ZVL‑K1 FETCh Subsystem (Noise
Page 1199 and 1200:
R&S ZVL‑K1 FETCh Subsystem (Noise
Page 1201 and 1202:
R&S ZVL‑K1 INITiate Subsystem (No
Page 1203 and 1204:
Page 1205 and 1206:
R&S ZVL‑K1 SENSe Subsystem (Noise
Page 1207 and 1208:
Page 1209 and 1210:
Page 1211 and 1212:
Page 1213 and 1214:
Page 1215 and 1216:
R&S ZVL‑K1 STATus Subsystem (Nois
Page 1217 and 1218:
R&S ZVL‑K1 STATus Subsystem (Nois
Page 1219 and 1220:
R&S ZVL‑K1 SYSTem Subsystem (Nois
Page 1221 and 1222:
R&S ZVL‑K1 ABORt Subsystem (WCDMA
Page 1223 and 1224:
R&S ZVL‑K1 CALCulate Subsystem (W
Page 1225 and 1226:
Page 1227 and 1228:
Page 1229 and 1230:
Page 1231 and 1232:
Page 1233 and 1234:
R&S ZVL‑K1 DISPlay Subsystem (WCD
Page 1235 and 1236:
R&S ZVL‑K1 INITiate Subsystem (WC
Page 1237 and 1238:
Page 1239 and 1240:
R&S ZVL‑K1 SENSe Subsystem (WCDMA
Page 1241 and 1242:
Page 1243 and 1244:
Page 1245 and 1246:
Page 1247 and 1248:
Page 1249 and 1250:
R&S ZVL‑K1 TRACe Subsystem (WCDMA
Page 1251 and 1252:
R&S ZVL‑K1 TRACe Subsystem (WCDMA
Page 1253 and 1254:
R&S ZVL‑K1 TRIGger Subsystem (WCD
Page 1255 and 1256:
Page 1257 and 1258:
Page 1259 and 1260:
Page 1261 and 1262:
Page 1263 and 1264:
Page 1265 and 1266:
Page 1267 and 1268:
R&S ZVL‑K1 DISPlay Subsystem (CDM
Page 1269 and 1270:
R&S ZVL‑K1 SENSe Subsystem (CDMA,
Page 1271 and 1272:
Page 1273 and 1274:
Page 1275 and 1276:
Page 1277 and 1278:
R&S ZVL‑K1 TRACe Subsystem (CDMA,
Page 1279 and 1280:
Page 1281 and 1282:
Page 1283 and 1284:
Page 1285 and 1286:
Page 1287 and 1288:
R&S ZVL‑K1 CALCulate Subsystem (E
Page 1289 and 1290:
Page 1291 and 1292:
Page 1293 and 1294:
Page 1295 and 1296:
Page 1297 and 1298:
R&S ZVL‑K1 CONFigure Subsystem (E
Page 1299 and 1300:
Page 1301 and 1302:
Page 1303 and 1304:
Page 1305 and 1306:
R&S ZVL‑K1 DISPlay Subsystem (EVD
Page 1307 and 1308:
Page 1309 and 1310:
R&S ZVL‑K1 SENSe Subsystem (EVDO,
Page 1311 and 1312:
Page 1313 and 1314:
Page 1315 and 1316:
Page 1317 and 1318:
R&S ZVL‑K1 TRACe Subsystem (1xEV-
Page 1319 and 1320:
Page 1321 and 1322:
Page 1323 and 1324:
Page 1325 and 1326:
R&S ZVL‑K1 CALCulate:BURSt Subsys
Page 1327 and 1328:
R&S ZVL‑K1 CALCulate:LIMit Subsys
Page 1329 and 1330:
Page 1331 and 1332:
Page 1333 and 1334:
Page 1335 and 1336:
Page 1337 and 1338:
Page 1339 and 1340:
Page 1341 and 1342:
Page 1343 and 1344:
R&S ZVL‑K1 CALCulate:MARKer Subsy
Page 1345 and 1346:
Page 1347 and 1348:
Page 1349 and 1350:
Page 1351 and 1352:
R&S ZVL‑K1 CONFigure Subsystem (W
Page 1353 and 1354:
Page 1355 and 1356:
Page 1357 and 1358:
Page 1359 and 1360:
Page 1361 and 1362:
R&S ZVL‑K1 DISPlay Subsystem (WLA
Page 1363 and 1364:
R&S ZVL‑K1 FETCh Subsystem (WLAN,
Page 1365 and 1366:
Page 1367 and 1368:
Page 1369 and 1370:
Page 1371 and 1372:
Page 1373 and 1374:
R&S ZVL‑K1 INITiate Subsystem (WL
Page 1375 and 1376:
Page 1377 and 1378:
R&S ZVL‑K1 SENSe Subsystem (WLAN,
Page 1379 and 1380:
Page 1381 and 1382:
Page 1383 and 1384:
Page 1385 and 1386:
Page 1387 and 1388:
Page 1389 and 1390:
Page 1391 and 1392:
Page 1393 and 1394:
R&S ZVL‑K1 STATus Subsystem (WLAN
Page 1395 and 1396:
R&S ZVL‑K1 STATus Subsystem (WLAN
Page 1397 and 1398:
R&S ZVL‑K1 TRACe Subsystem (WLAN,
Page 1399 and 1400:
Page 1401 and 1402:
Page 1403 and 1404:
R&S ZVL‑K1 TRIGger Subsystem (WLA
Page 1405 and 1406:
R&S ZVL‑K1 UNIT Subsystem (WLAN,
Page 1407 and 1408:
R&S ZVL‑K1 ABORt Subsystem (WiMAX
Page 1409 and 1410:
Page 1411 and 1412:
Page 1413 and 1414:
Page 1415 and 1416:
Page 1417 and 1418:
Page 1419 and 1420:
Page 1421 and 1422:
Page 1423 and 1424:
Page 1425 and 1426:
Page 1427 and 1428:
Page 1429 and 1430:
Page 1431 and 1432:
Page 1433 and 1434:
Page 1435 and 1436:
Page 1437 and 1438:
Page 1439 and 1440:
Page 1441 and 1442:
Page 1443 and 1444:
Page 1445 and 1446:
Page 1447 and 1448:
Page 1449 and 1450:
Page 1451 and 1452:
Page 1453 and 1454:
Page 1455 and 1456:
Page 1457 and 1458:
Page 1459 and 1460:
R&S ZVL‑K1 DISPlay Subsystem (WiM
Page 1461 and 1462:
Page 1463 and 1464:
Page 1465 and 1466:
R&S ZVL‑K1 FETCh Subsystem (WiMAX
Page 1467 and 1468:
Page 1469 and 1470:
Page 1471 and 1472:
Page 1473 and 1474:
Page 1475 and 1476:
Page 1477 and 1478:
R&S ZVL‑K1 INITiate Subsystem (Wi
Page 1479 and 1480:
Page 1481 and 1482:
R&S ZVL‑K1 MMEMory Subsystem (WiM
Page 1483 and 1484:
R&S ZVL‑K1 SENSe Subsystem (WiMAX
Page 1485 and 1486:
Page 1487 and 1488:
Page 1489 and 1490:
Page 1491 and 1492:
Page 1493 and 1494:
Page 1495 and 1496:
Page 1497 and 1498:
Page 1499 and 1500:
R&S ZVL‑K1 STATus Subsystem (WiMA
Page 1501 and 1502:
R&S ZVL‑K1 STATus Subsystem (WiMA
Page 1503 and 1504:
R&S ZVL‑K1 TRACe Subsystem (WiMAX
Page 1505 and 1506:
Page 1507 and 1508:
Page 1509 and 1510:
Page 1511 and 1512:
R&S ZVL‑K1 TRIGger Subsystem (WiM
Page 1513 and 1514:
R&S ZVL‑K1 TRIGger Subsystem (WiM
Page 1515 and 1516:
R&S ZVL‑K1 UNIT Subsystem (WiMAX,
Page 1518 and 1519:
R&S ZVL-K1 Service Request 5 Remote
Page 1520 and 1521:
R&S ZVL-K1 Service Request result%
Page 1522 and 1523:
R&S ZVL-K1 Service Request Reading
Page 1524 and 1525:
R&S ZVL-K1 Using Marker and Delta M
Page 1526 and 1527:
R&S ZVL-K1 Limit Lines and Limit Te
Page 1528 and 1529:
R&S ZVL-K1 Measuring the Channel an
Page 1530 and 1531:
R&S ZVL-K1 Occupied Bandwidth Measu
Page 1532 and 1533:
R&S ZVL-K1 Fast Power Measurement o
Page 1534 and 1535:
R&S ZVL-K1 Fast Power Measurement o
Page 1536 and 1537:
R&S ZVL-K1 Fast Level Measurement U
Page 1538 and 1539:
R&S ZVL-K1 Measuring the Magnitude
Page 1540 and 1541:
R&S ZVL-K1 Averaging I/Q Data CALL
Page 1542 and 1543:
R&S ZVL-K1 Spectrum Emission Mask M
Page 1544 and 1545:
R&S ZVL-K1 Spectrum Emission Mask M
Page 1546 and 1547:
R&S ZVL-K1 Spurious Emissions Measu
Page 1548 and 1549:
R&S ZVL-K1 Spurious Emissions Measu
Page 1550 and 1551:
R&S ZVL-K1WLAN TX Measurements - Pr
Page 1552 and 1553:
R&S ZVL-K1 WiMAX, WiBro Measurement
Page 1554 and 1555:
Page 1557 and 1558:
R&S ZVL-K1 Device-Specific Messages
Page 1559 and 1560:
R&S ZVL-K1 3GPP Base Station Measur
Page 1561 and 1562:
Page 1563 and 1564:
Alphabetical List of Remote Command
Page 1565 and 1566:
Page 1567 and 1568:
Page 1569 and 1570:
Page 1571 and 1572:
Page 1573 and 1574:
Page 1575 and 1576:
Page 1577 and 1578:
Page 1579 and 1580:
Page 1581 and 1582:
Page 1583 and 1584:
Page 1585 and 1586:
Page 1587 and 1588:
Index R&S ZVL-K1 Index 1 1xEV-DO BT
Page 1589 and 1590:
Index R&S ZVL-K1 measurement with c
Page 1591 and 1592:
Index R&S ZVL-K1 ESC...............
Page 1593 and 1594:
Index R&S ZVL-K1 measurement mode 1
Page 1595 and 1596:
Index R&S ZVL-K1 base unit.........
Page 1597 and 1598:
Index R&S ZVL-K1 ASCII File Export
Page 1599 and 1600:
Index R&S ZVL-K1 dB per Division (r
Page 1601 and 1602:
Index R&S ZVL-K1 General Settings (
Page 1603 and 1604:
Index R&S ZVL-K1 Modulation Analysi
Page 1605 and 1606:
Index R&S ZVL-K1 Reload (K82) .....
Page 1607 and 1608:
Index R&S ZVL-K1 Spectrum FFT (remo
Page 1609 and 1610:
Index R&S ZVL-K1 K82 option .......
show all

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Create successful ePaper yourself

Delete template?

Save as template?