Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

1xEV-DO BTS Analyzer (Option K84) R&S ZVL-K1
Add Channel
Inserts a new channel below the one selected. The default values for a new channel are:
ChannelType MAC
Walsh Ch.SF 2.64
SymbolRate 19.2 ksps (automatically calculated)
Modulation BPSK-I
Power 0 dB (automatically calculated)
State Off
DomainConflict No (automatically calculated)
To change the channel type use the dropdown menu that opens when selecting / highlighting
the Channel Type field that should be changed and pressing the ENTER key. The radio
configuration settings are changed in the same way.
To change the channel number type another channel number in the form
'ChannelNumber.SpreadingFactor' or simply the code number (see Select Code Slot for
details) in the respective field and confirm the change with the ENTER key.
To activate or deactivate a channel, simply select the field and confirm with the ENTER key.
The R&S ZVL-K1 automatically checks for conflicts between two active channels.
� Remote: CONF:CDP:CTAB:DATA "0…13, 2…7, 0…127, 0…30, 0, 0, 0 | 1"
Delete Channel
Meas
Sort
Save
Deletes the selected channel without further notice.
Initiates a measurement in Automatic Channel Search mode. The measurement results are
applied to the active channel table. The active channel table is overwritten without further notice.
The softkey is only available if the Auto Search mode is selected in the Channel Table
Settings dialog box.
Sorts the table according to the following rules.
First off, active channels are separated from inactive channels. Within these categories sorting is
then done first by the channel type and next by the spreading factor in ascending order. Last,
the sorting is done by the code number, also in ascending order.
Saves the table under its specified name in the xml-format. If you edit a channel table and want
to keep the original channel table, change the name of the edited channel table before saving it.
1303.6573.42 3.348 E-5