28.12.2012 Views

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

Software Manual for the R&S ZVL-K1 - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Remote Commands of <strong>the</strong> 1xEV-DO BTS Analyzer Option (K84) R&S <strong>ZVL</strong>‑<strong>K1</strong><br />

[SENSe:]CDPower:IQLength<br />

This command sets <strong>the</strong> capture length in multiples of <strong>the</strong> power control group.<br />

The numeric suffix at SENSe is irrelevant <strong>for</strong> this command.<br />

Parameter<br />

2 to 12<br />

Example<br />

CDP:IQL 8<br />

Sets 8 PCGs as capture length.<br />

Characteristics<br />

RST value: 3<br />

SCPI: device-specific<br />

Mode<br />

EVDO<br />

[SENSe:]CDPower:CTYPe<br />

This command is used to select <strong>the</strong> channel type. The number of results <strong>the</strong>n changes in most<br />

analyses, such as code domain power, symbol EVM, and bit stream, because ei<strong>the</strong>r a different<br />

spreading factor or a different number of symbols is available <strong>for</strong> <strong>the</strong> analysis.<br />

Parameter<br />

PILot | MAC | PREamble | DATA<br />

Example<br />

CDP:CTYP MAC<br />

Select MAC channel type.<br />

Characteristics<br />

RST value: PILOT<br />

SCPI: device-specific<br />

Mode<br />

EVDO<br />

[SENSe:]CDPower:ICTReshold<br />

This command defines <strong>the</strong> minimum power which a single channel must have compared to <strong>the</strong><br />

total signal in order to be regarded as an active channel. Channels below <strong>the</strong> specified<br />

threshold are regarded as "inactive".<br />

The numeric suffix at SENSe is irrelevant <strong>for</strong> this command.<br />

Parameter<br />

–100 dB to 10 dB<br />

Example<br />

CDP:ICTR –10<br />

Sets <strong>the</strong> minimum power threshold to –10 dB.<br />

Characteristics<br />

RST value: –40 dB<br />

SCPI: device-specific<br />

1303.6573.42 4.638 E-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!