Downloading - Weber Marking Systems

DIALOG-RADIOBUTTON
DIALOG-SET-TEXT
Defines a radio button in the latest dialog box.
Appendix C: Automated Print Control
Syntax: DIALOG-RADIOBUTTON = text, x, y, width, height, $Status
Notes:
text is the text that follows the radio button.
When $Status is assigned a value before DIALOG-SHOW command,
its value at the moment of executing DIALOG-SHOW will determine
whether the box is checked.
After a pushbutton is clicked, $Status will be 1 if the box is
checked. If the box is not checked, $Status will be 0.
Sets the title or text of a control item to the specified text.
Syntax: DIALOG-SET-TEXT = $id, text
Notes:
This command applies only to MANUALCLOSE dialog boxes.
This command must appear after DIALOG-SHOW and before
DIALOG-CLOSE.
$id is the ID of the control item that $DLGITEMID is saved to.
Legitronic User Manual (v3.4) 197