Downloading - Weber Marking Systems

Configuring Legi Print Drivers
Appendix E: Graphics Support
You must tell Legi what graphics are downloaded and resident in the
printer. Do this by using the Graphics property page of the Legi print
driver. Note that the graphics you want to use must have previously
been downloaded to the printer.
You will need administrative access to the computer to perform the
following procedures.
Add Graphic Procedure
1. Display the properties page of the Legi driver you are using and
select the Graphics tab.
2. Enter the name of the graphic as it is used by Legi in the Legi
Filename edit control. NOTE: Do not include the driver letter or
path.
For example, in a Legi graphic field, the name might be
C:\Graphics\Logo.pcx. Enter only Logo.pcx in this edit control.
3. Enter the graphic filename in the Download Filename edit control.
This is the name that was used when you downloaded the graphic
to the printer.
4. Choose the location that was specified when you downloaded the
graphic to the printer. Select it from the Location list box.
5. Press the Add To Downloaded List button.
The graphic is added to the Downloaded Printer Graphics list.
6. Press OK when you are done adding graphics.
Legitronic User Manual (v3.4) 232