Downloading - Weber Marking Systems

Zebra Printers: Graphics
Downloading Graphics
Procedure
Appendix E: Graphics Support
Zebra printers support downloading PCX graphics into the
printer. Zebra requires that the PCX file first be converted
into its proprietary format and then downloaded. Zebra
does not support rotation of graphics. Once the graphic is
downloaded, it will only print in that one orientation.
You convert graphics using Zebra Tools 3.1.
NOTE: Make sure that the printer is powered on and
attached to the computer before starting this procedure.
1. Load the Zebra Tools application.
2. Select Convert, Graphics.
3. Enter the graphic name to download in Source.
4. Enter the name to use for the converted file in
Destination.
NOTE: The destination name is limited to 8 characters.
This can be the same name (without the PCX
extension) as the source graphic, because the extension
will be changed to GRF.
5. Select the destination device (usually B:).
NOTE: R: is used for label data and is cleared at the
beginning of every label printed. Therefore, do not use
R: for storing graphics.
6. Enter the name the printer will use to identify this
graphic.
NOTE: This name is limited to 8 characters. It can also
be the same as the previously entered names.
7. Select rotation if a rotation other than 0° is desired.
Once downloaded, the graphic cannot be rotated.
Legitronic User Manual (v3.4) 225