Downloading - Weber Marking Systems

Reference
4. Designing Labels
Reference fields allow you to reference other fields on the label. The field
will combine data from the referenced fields in their order of reference.
Specification Description
Padding Type of padding desired when the field content is shorter than
the length specified in the Fill Length field – none, pad left, or
pad right.
Fill Character Character to be used to pad the field.
Fill Length The maximum allowable length of the field.
Fragment – you can specify a start position and maximum length for each
referenced field or for the entire group of referenced fields.
Start The position at which the data should begin.
Length The maximum length of the field.
Referenced
Fields
From the drop-down List of Fields, select each field you want to
reference. Once selected, the field name appears in the List of
Fields box.
To add the selected field to end of the referenced field list, click
Add.
To insert the selected field before a particular referenced field
list, select that referenced field and click Insert.
To remove a field from the referenced field list, select it and
click Remove.
List of Fields A drop-down list of fields available for reference in this field.
Legitronic User Manual (v3.4) 62