You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. Phonograph (Simulates an Old Record)<br />
Chapter 4. Applying Effects to the Sound (Effects)<br />
This effect mutes the tone and adds disc noise to simulate the sound of music played on an old record player.<br />
Screen Parameter Explanation Value<br />
DISC TYPE Determines the type of disc noise. LP (33 RPM record),<br />
EP (45 RPM record),<br />
SP (78 RPM record)<br />
DISC NOISE LEVEL Specifies the volume of the disc noise. 0–127 Y<br />
DEPTH Adjusts the tone. As this value is increased, the high range and<br />
low range will be cut, and the mid range will be emphasized.<br />
OUTPUT PAN Specifies the stereo location of the output from the Phonograph<br />
effect.<br />
10. Compressor (Make the Volume Level More Consistent)<br />
This effect suppresses loud volume levels and boosts soft volume levels, making the volume more consistent.<br />
11. Limiter (Smooth Out Irregularities in Volume)<br />
This effect compresses the sound when it exceeds a specified volume level, thus preventing distortion.<br />
0–20 X<br />
L64–R63<br />
OUTPUT LEVEL Specifies the output volume from the Phonograph effect. 0–127<br />
Screen Parameter Explanation Value<br />
ATTACK Specifies the duration of the attack when sound is input. 0–127 X<br />
SUSTAIN Specifies the time over which low-level sounds will be<br />
boosted to reach the specified volume.<br />
POST GAIN Adjusts the output signal. 0, +6, +12, +18<br />
LOW GAIN Adjusts the boost or cut of the low frequency range. -15–15<br />
HIGH GAIN Adjusts the boost or cut of the high frequency range. -15–15<br />
OUTPUT LEVEL Specifies the output volume from the Compressor effect. 0–127<br />
0–127 Y<br />
Screen Parameter Explanation Value<br />
THRESHOLD<br />
(Threshold Level)<br />
Specifies the volume level at which compression will begin. 0–127 Y<br />
RATIO<br />
(Compression Ratio)<br />
Specifies the ratio of compression. 1.5:1, 2:1, 4:1, 100:1 X<br />
RELEASE Specifies the time from when the volume drops below the<br />
Threshold Level until compression is no longer applied.<br />
0–127<br />
POST GAIN Adjusts the output signal. 0, +6, +12, +18<br />
OUTPUT PAN Specifies the stereo location of the output from the Limiter<br />
effect.<br />
L64–R63<br />
OUTPUT LEVEL Specifies the output volume of the Limiter effect. 0–127<br />
49<br />
Chapter 4