13.01.2013 Views

Owner's Manual - Roland

Owner's Manual - Roland

Owner's Manual - Roland

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 4. Applying Effects to the Sound (Effects)<br />

Screen Parameter Explanation Value<br />

OUTPUT LEVEL Specifies the output volume from the Short Delay effect. 0–127<br />

* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note<br />

triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)<br />

* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)<br />

21. Auto PAN (Automatically Move the Stereo Location)<br />

fig.MFXAPN<br />

This effect automatically moves the stereo location of the sound. You can cause the sound to be panned left and right in time with<br />

low notes such as a Bass Drum, or in synchronization with the BPM of the pattern.<br />

Screen Parameter Explanation Value<br />

LFO TYPE Determines the waveform that will be used<br />

to pan the sound to left and right.<br />

TRI, TRP, SIN, SAW1, SAW2, SQR<br />

BASS SENS Make this setting when you wish to shift the<br />

panning at the timing of the bass notes.<br />

OFF (the panning will change at the speed<br />

specified by Rate),<br />

MODE1 (the Rate value will increase at<br />

the timing of the bass notes),<br />

MODE2 (the panning will change at the<br />

timing of the bass notes)<br />

DEPTH Specifies the depth of panning. 0–127 Y<br />

RATE Specifies the rate at which the pan will be<br />

moved.If a note value or measure is selected<br />

as the value of this parameter, the Rate will<br />

synchronize with the tempo of the pattern at<br />

intervals of the specified note value or measure.<br />

* When the Bass Sensitivity parameter is set<br />

to “MODE2,” the Rate setting will be<br />

ignored.<br />

LOW GAIN Adjusts the boost or cut of the low frequency<br />

range.<br />

HIGH GAIN Adjusts the boost or cut of the high frequency<br />

range.<br />

OUTPUT LEVEL Specifies the output volume of the AUTO<br />

PAN effect.<br />

0.1–10.0 (Hz), notes (*1), measures (*2) X<br />

* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note<br />

triplets), 4. (dotted quarter note), 2 (half note), 1T (whole note triplets), 2. (dotted half note), 1 (whole note)<br />

* 2: 2M (2 measures), 3M (3 measures), 4M (4 measures), 8M (8 measures), 16M (16 measures)<br />

-15–15<br />

-15–15<br />

0–127<br />

55<br />

Chapter 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!