You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MIDI reception settings<br />
Chapter 8. System Settings and MIDI Applications<br />
Indication Parameter Explanation Values<br />
AUTO<br />
CHANNEL<br />
ARPEGGIO<br />
CTRL CH<br />
(arpeggio<br />
control channel)<br />
RPS CTRL<br />
CH<br />
(RPS control<br />
channel)<br />
RX SYSEX<br />
(receive systemexclusive)<br />
Determines how MIDI messages will be received from external<br />
MIDI devices.<br />
* At the factory settings this is set to “OFF.”<br />
* Set this “OFF” if you want note messages of the channel<br />
specified as the Arpeggio Control Channel or RPS Control<br />
Channel to control arpeggios or RPS from an external<br />
device.<br />
Specifies the channel on which note messages from an external<br />
MIDI device will control arpeggios when Auto Channel<br />
is “OFF.” When note messages of the specified channel are<br />
received from an external MIDI device, an arpeggio can be<br />
generated according to that note data, and will sound the<br />
current part. At the factory settings this is set to “16.”<br />
* This setting is ignored if Auto Channel is “ON.”<br />
Specifies the channel on which note messages from an external<br />
MIDI device will control RPS when Auto CHANNEL is<br />
“OFF.” RPS can be played by receiving note messages on the<br />
specified channel. At the factory settings this is set to “15.”<br />
* This setting is ignored if Auto Channel is “ON.”<br />
Determines whether the D2 will receive system exclusive<br />
messages. When this setting is “OFF,” system exclusive<br />
messages will not be received.<br />
SOFT THRU If this is “ON,” MIDI messages received at the MIDI IN connector<br />
will be re-transmitted without change from the MIDI<br />
OUT connector.<br />
DEVICE ID<br />
(device ID<br />
number)<br />
RX BULK<br />
(bulk receive)<br />
This setting is necessary only if data is being transmitted<br />
separately to two or more D2 units. Otherwise, you should<br />
not change this setting. At the factory settings, the device ID<br />
number is set to “17.”<br />
* If you forget the device ID that was used when bulk data<br />
was saved on an external device, it will no longer be possible<br />
to receive the saved bulk data.<br />
Data that was saved on an external device can be sent back<br />
to the D2.<br />
For details refer to p. 81.<br />
OFF:<br />
The patches of each part can be<br />
played independently according<br />
to the channel of the MIDI data<br />
transmitted from an external<br />
MIDI device.<br />
ON:<br />
The patch of the part selected on<br />
the D2 can be played, regardless<br />
of the transmit channel of the external<br />
MIDI device.<br />
OFF, 1–16<br />
OFF, 1–16<br />
OFF, ON<br />
OFF, ON<br />
17–32<br />
OFF:<br />
Data will not be received.<br />
PTN:<br />
Data of the current pattern will<br />
be received.<br />
ALL:<br />
All data will be received.<br />
77<br />
Chapter 8
Change language