Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 8. System Settings and MIDI Applications<br />
Sequencer settings<br />
Indication Parameter Explanation Values<br />
74<br />
SYNC MODE Specifies how the internal sequencer will operate<br />
and how MIDI Clock messages will be<br />
transmitted and received.<br />
SYNC OUT Determines whether synchronization-related<br />
MIDI messages will be transmitted. When<br />
this is on, the following messages will be<br />
transmitted from the MIDI OUT connector.<br />
* If the SYNC MODE is set to “SLAVE,” it<br />
will not be possible to set SYNC OUT to<br />
“ON.”<br />
* If “VINYL” is selected as the D-FIELD<br />
function, Timing Clock (F8) and Song<br />
Position Pointer (F2) will not be output<br />
even if you set SYNC OUT to “ON.”<br />
SONG LOOP<br />
MODE<br />
SONG PLAY<br />
MODE<br />
Specifies how songs will be played back. You<br />
can cause the same song to be played back repeatedly,<br />
or all songs to be played back in sequence.<br />
Specifies whether or not the pattern setup parameters<br />
will be loaded when you move to<br />
the next step of the song.<br />
INT:<br />
The internal sequencer will synchronize<br />
to the internal tempo clock.<br />
Any MIDI Clock messages received<br />
from an external device will be ignored.<br />
REMOTE:<br />
Operation will be essentially the<br />
same as “INT.” However, Start/<br />
Stop messages from the external<br />
MIDI device will control playback/<br />
stop for the internal sequencer.<br />
SLAVE:<br />
The internal sequencer will synchronize<br />
to MIDI Clock messages<br />
received from an external device. If<br />
no MIDI Clock messages are being<br />
received, pattern/song playback<br />
will not occur even if you press the<br />
[ ] button.<br />
OFF:<br />
Messages will not be transmitted.<br />
ON:<br />
The following messages will be<br />
transmitted from the MIDI OUT<br />
connector.<br />
•Timing clock: F8<br />
•Start: FA<br />
•Continue: FB<br />
•Stop: FC<br />
•Song Position Pointer: F2<br />
OFF:<br />
This is the normal condition. The<br />
currently selected song will be<br />
played back only once.<br />
LOOP1:<br />
The currently selected song will be<br />
played back repeatedly.<br />
ALL:<br />
All songs will be played back repeatedly<br />
in sequence.<br />
* When using “ALL” to playback a<br />
song, we recommend that a pattern<br />
which mutes all parts (i.e., a silent<br />
pattern) be inserted at the end of the<br />
song, so that songs are joined<br />
smoothly.<br />
MODE1:<br />
The setup parameters, mute, and realtime<br />
modify settings will be loaded<br />
each time you move to the next<br />
step.<br />
MODE2:<br />
Setup parameters, mute, and realtime<br />
modify will be maintained<br />
during playback only if the next<br />
step plays a pattern that is the same<br />
as the currently playing pattern.