Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 6. Creating an Original Pattern<br />
Copying a pattern (Pattern Copy)<br />
fig.PTNCPY<br />
This operation copies a pattern to a different pattern.<br />
Display Parameter Explanation Setting<br />
SOURCE Select the data that you wish to copy.<br />
ALL: all performance data,<br />
* Press the part button [R] or [1]–[7] of the part whose data PHRASE: only note data,<br />
you wish to erase, getting its indicator to light.<br />
SETUP: only setup parameters<br />
(p. 20)<br />
TOP/END Specify the range of measures that will be copied. The CUR-<br />
RENT display will indicate the first measure to be copied,<br />
and the NEXT display will indicate the last measure to be<br />
copied.<br />
001–END<br />
* This will not be displayed if Source is “SETUP.”<br />
DESTINATION Specify the copy-destination pattern. A01–U00<br />
* The copy destination part can be specified only if the copy source part is a single part. If the copy source consists of two or more parts, each<br />
will be copied to the same part.<br />
* If you are copying the data of a part to another part within the same pattern, you can select only one part at a time.<br />
It is not possible to copy between part R and parts 1–7.<br />
66<br />
MEASURE Specify the number of the measure in the copy-destination<br />
pattern to which the data will be copied.<br />
001–END<br />
TIMES Specify the number of times that the data will be copied. 1–32 (maximum)<br />
MODE Specify whether the data at the copy destination will be replaced<br />
by the copy-source data, or will be mixed with the<br />
copy-source data.<br />
REPLACE, MIX