SMCD3G Cable Modem Gateway User Manual

More documents

Recommendations

Info

2 Installing Your Gateway This chapter describes how to install your SMCD3G Cable Modem Gateway. The topics covered in this chapter are: � Finding a Suitable Location (page 15) � Connecting to the LAN (page 15) � Connecting the WAN (page 16) � Powering on the Gateway (page 16) 14 SMCD3G Cable Modem Gateway User Manual
Finding a Suitable Location Installing Your Gateway Your SMCD3G Cable Modem Gateway can be installed in any location with access to the cable network. All of the cables connect to the rear panel of the Gateway for better organization and utility. The LED indicators on the front panel are easily visible to provide you with information about network activity and status. For optimum performance, the location you choose should: � Be close to a working AC power outlet. � Allow sufficient air flow around the Gateway to keep the device as cool as possible. � Not expose the Gateway to a dusty or wet environment. Connecting to the LAN Using an Ethernet LAN cable, you can connect the Gateway to a desktop computer, notebook, hub, or switch. Your Gateway supports auto-MDI/MDIX, so you can use either a standard straight-through or crossover Ethernet cable. 1. Connect either end of an Ethernet cable to one of the four LAN ports on the rear panel of the Gateway (see Figure 3). Figure 3. Connecting to a LAN Port on the Gateway Rear Panel 2. Connect the other end of the cable to your computer’s network-interface card (NIC) or to another network device (see Figure 4). 15 SMCD3G Cable Modem Gateway User Manual
Page 2 and 3: SMC Networks 20 Mason Irvine, CA. 9
Page 4 and 5: Contents System Settings Menu......
Page 6 and 7: Key Features Preface The following
Page 8 and 9: Typographic Conventions Preface Thi
Page 10 and 11: Unpacking Package Contents Getting
Page 12 and 13: Getting to Know Your Gateway Table
Page 16 and 17: Installing Your Gateway Figure 4. C
Page 18 and 19: Configuring Your Computer for TCP/I
Page 24 and 25: Pre-configuration Guidelines Before
Page 26 and 27: Configuring Your Gateway Accessing
Page 28 and 29: Configuring Your Gateway Web Manage
Page 30 and 31: Password Settings Menu Configuring
Page 32 and 33: LAN Settings Menu Configuring Your
Page 34 and 35: Configuring Your Gateway 4. To conf
Page 36 and 37: Configuring Your Gateway 5. To chan
Page 38 and 39: Security Settings (Firewall) Menu C
Page 40 and 41: Configuring Your Gateway 4. Click A
Page 42 and 43: Configuring Your Gateway Defined Ac
Page 44 and 45: Configuring Your Gateway 5. To defi
Page 46 and 47: Configuring Your Gateway Figure 25.
Page 48 and 49: To enable port triggering: Configur
Page 50 and 51: Configuring Your Gateway Table 13.
Page 52 and 53: Configuring Schedule Rules Configur
Page 54 and 55: Configuring Email Alerts Configurin
Page 56 and 57: Configuring DMZ Settings Configurin
Page 58 and 59: Viewing Status Information Configur
Page 60 and 61: Standards � 802.3 10BaseT Etherne
Page 62 and 63: Transmitter � Modulation: - TDMA:
Page 64 and 65:
FCC Interference Statement Appendix
Page 66 and 67:
Index F L Factory defaults LAN conn
show all

SMCD3G Cable Modem Gateway User Manual

Create successful ePaper yourself

Delete template?

Save as template?