SMCD3G Cable Modem Gateway User Manual

System Settings Menu
The System Settings menu lets you:
� Enable or disable UPnP
� Configure and manage your password
� Set the system timeout settings
Configuring Your Gateway
To access the System Settings menu, click System in the menu bar. Figure 14 shows an
example of the menu and Table 4 describes the setting you can select.
Figure 14. System Settings Menu
Table 4. System Settings Menu Option
Option Description
Enable UPnP Configures your Gateway as a Universal Plug and Play (uPnP) Internet gateway. UPnP allows for dynamic
connectivity between devices on a network. A UPnP-enabled device like your Gateway can obtain an IP address,
advertise its capabilities, learn about other connected UPnP devices and then communicate directly with those
devices. The same device can end its connection cleanly when it wishes to leave the UPnP community. The intent
of UPnP is to support zero-configuration, "invisible" networking of devices including intelligent appliances, PCs,
printers, and other smart devices using standard protocols.
Check = uPnP is enabled on the Gateway.
Uncheck = uPnP is disabled on the Gateway. (default)
29
SMCD3G Cable Modem Gateway User Manual