Cables for Installations and Industry - Draka

INSTALLATION CABLES
18
N
AP PLI CA TION
Ca ble for the con trol, meas ur ing and sig nal cir cuits of
elec tri cal equip ment and feeder ca ble for elec tronic
equip ment for fixed sur face and flush- mounted
in stal la tions, in doors and out doors.
The ar mour ing and the lapped AI- PE lami nate forms
a good me chani cal, elec tri cal and elec tro mag neti cal
shield for the ca ble, and the lami nate com bined with the
PE- sheath forms a good mois ture bar rier.
Cur rent car ry ing ca paci ties ac cord ing to HD 384.5.523
(or IEC 364- 5- 523): “Elec tri cal in stal la tion of build ings”
-se ction 523: Cur rent car ry ing ca paci ties.
Maxi mum per mis si ble tem pera ture of con duc tor:
- in con tinu ous use +70 °C
- in a short cir cuit (max. 5 s) +160 °C
Low est rec om mended
han dling tem pera ture: -15 °C
Mini mum rec om mended bend ing ra dius:
- dur ing in stal la tion 12xD
- in a fi nal in stal la tion if bent only once 8xD
Maxi mum per mis si ble ten sile stress
dur ing in stal la tion Ax50 N/mm²
Ar mou red me tal- sheat hed cab le
MJAMARM
3-wires
4-wires
4-wires*
5-wires
RATED VOLT AGE
U o /U = 450/750 V
STAN DARD
SFS 5247 and SS 4240219
CORE IDEN TI FI CA TION
S-ystem
*Only for 1,5 and 2,5 mm 2 cables
Control cables 7...19 wires; numbers
Self- extinguishing IEC 332-1
Elec tro mag netic com pati bil ity