Pure-Flo®

BODY DIMENSION CHARTS
ISO & DIN
ISO & DIN FORGINGS
ISO DIN SERIES 1 DIN SERIES. 2 DIN SERIES 3
END
CONNECTION
SIZE DN
TOPWORKS
SIZE A D B C
1.0 1.2 1.6 2.0 2.3 2.6 2.9
B C B C B C
DN6 BIOTEK 89 25 8 X X 8 1.0
DN8 BIOTEK 89 25 13.5 X X X 10 1.0
DN10 BIOTEK 89 25 17.2 X X X 12 1.0 13 1.5 14 2.0
DN15 1/2" 106 25 21.3 X X 18 1.0 19 1.5 20 2.0
DN20 3/4" 118 25 26.9 X X 22 1.0 23 1.5 24 2.0
DN25 1" 127 25 33.7 X X 28 1.0 29 1.5 30 2.0
DN32 1-1/2" 174 35 42.4 X X 34 1.0 35 1.5 36 2.0
DN40 1-1/2" 174 35 48.3 X X X 40 1.0 41 1.5 42 2.0
DN50 2" 191 35 60.3 X X X 52 1.0 53 1.5 54 2.0
DN65 * 2 1/2" 229 35 76.1 X 70 2.0
DN80 * 3" 229 35 88.9 X 85 2.0
DN100 * 4" 292 31 114.3 X 104 2.0
* Wrought body is standard.
ISO CASTINGS
END
CONNECTION TOPWORKS
SIZE DN SIZE A D B C
1.0 1.2 1.6 2.0 2.3 2.6 2.9
DN15 1/2" 106 25 21.3 X X X
DN20 3/4" 118 25 26.9 X X X
DN25 1" 127 25 33.7 X X X X
DN32 1-1/2" 174 25 42.4 X X X X
DN40 1-1/2" 174 35 48.3 X X X X
DN50 2" 191 35 60.3 X X X X
US, SMS & DIN CASTINGS
US, SMS & DIN US SMS DIN SER. 1 DIN SER. 2 DIN SER. 3
END END
CONNECTION CONNECTION TOPWORKS
SIZE INCH SIZE DN SIZE A D B C
20 GA.18 GA.16 GA. 14 GA.
B C B C B C B C
.035" .049" .065" .083"
(.9) (1.2) (1.7) (2.1)
1/2" DN15 1/2" 3.5" (89) .5" (12.7) .5" (12.7) X X X NA NA 18 1.0 19 1.5 20 2.0
3/4" DN20 3/4" 4.0" (102) .5" (12.7) .75" (19.1) X X X X NA NA 22 1.0 23 1.5 24 2.0
1" DN25 1" 4.5" (114) .5" (12.7) 1" (25.4) X X X 25 1.2 28 1.0 29 1.5 30 2.0
1-1/4" DN32 1-1/2" 5.5" (140) .5" (12.7) 32 1.2 34 1.0 35 1.5 36 2.0
1-1/2" DN40 1-1/2" 5.5" (140) .5" (12.7) 1.5" (38.1) X X X 38 1.2 40 1.0 41 1.5 42 2.0
2" DN50 2" 6.25" (159) .5" (12.7) 2" (50.8) X X 51 1.2 52 1.0 53 1.5 54 2.0
2-1/2" DN65 2-1/2" 7.62" (194) .5" (12.7) 2.5" (63.5) X X 63.5 1.6 70 2.0
3" DN80 3" 8.75" (222) .62" (15.9) 3" (76.2) X X 76.1 2.0 85 2.0
4" DN100 4" 11.5" (292) .62" (15.9) 4" (101.6) X X 104 2.0
Tri-Clamp, Quick Disconnect and Buttweld Pipe End Connections are also available.
All units are in mm unless otherwise noted.
The Advantage actuator, Dia-Flo actuator or Dualrange bonnet assembly** can be mounted to the ISO Body.
DN 32 (1 1/4") utilizes DN 40 (1 1/2") sized actuators.
**Available only with Dia-Flo Actuator.
13
END CONNECTIONS/BODY DIMENSIONS