You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
16 PURE-FLO ® ZERO STATIC<br />
PURE-FLO ® BIO-TEK ®<br />
The Standard Zero Static*, as shown with “U”<br />
bend, provides minimal dead leg and is commonly<br />
used as a point-of-use valve.<br />
TUBING SIZE<br />
SIZE RANGE<br />
1/4"–3" main valve by 4" tube maximum (DN 8–80 by<br />
main valve by DN 100 tube maximum)<br />
PRESSURE/TEMPERATURE<br />
See General Engineering Data section, page 75.<br />
BODY MATERIAL<br />
• 316L Stainless Steel Forging, ASTM A-182, 1/4"–2"<br />
(DN 8–50)<br />
• 316L Stainless Steel Investment Cast, CF3M,<br />
2-1/2"–4" (DN 65–100)<br />
END CONNECTIONS<br />
Buttweld:<br />
• 14, 16, 18, 20 Gauge O.D. Tubing<br />
• Schedule 5, 10, and 40 Pipe 5<br />
• DIN/ISO Ends<br />
Quick Disconnect:<br />
• Tri-Clover Tri-Clamp ®<br />
• Cherry Burrell “S”, “Q”, and “I” line ®<br />
• Others available upon request<br />
* The Zero Static fabrication is supplied with a tube<br />
spool piece as a standard; “U” Bends are available<br />
upon request.<br />
Inch 0.25 .375 0.50 0.75 1.00 1.50 2.00 2.50 3.00 4.00<br />
(DN) 4 8 10 15 20 25 40 50 65 80 100<br />
.25, .375,<br />
.50 8, 10, 15 X X X X X X X X X X<br />
0.50 15 X X X X X X X X3 0.75 20 X X X X X X X<br />
1.00 25 X X X X X X<br />
1.50 40 X X X X X<br />
2.00 50 X X X X<br />
2.50 65 X2 X2 X2 3.00 80 X X<br />
1 Castings available for<br />
bodies 2.50" and larger.<br />
2 2.50" Forged Body uses<br />
3.00" topworks with 2.50"<br />
ends.<br />
3 Does not comply with 6D.<br />
4 Chart applies only to O.D<br />
tubing.<br />
5 Not available with “U”<br />
bends.
Change language