Pure-Flo®

More documents

Recommendations

Info

18 ZERO STATIC “T” WITH INTEGRAL SAMPLE VALVE In addition to the inherent design features of the Zero Static “T”, the integral sample valve option assits in providing a more representative sample of water quality directly at the point-of-use applications. Zero Static “T” shown with instrument port PURE-FLO ® ZERO STATIC “T” WITH INTEGRAL SAMPLE VALVE To assist in providing a more representative sample of water quality directly at a point-of-use application, ITT has developed a block bodied point-of-use valve fabrication utilizing an integral sample port. The body is manufactured from ASTM A479 bar stock for high quality and ease of fabrication. The block body design permits welding of tube stubs directly to the exterior of the valve body, eliminating the need of an interior elliptical weld necessary when inserting a tube directly through a forged body. In addition, the integral sample valve is integral to the main valve assembly, which reduces contact surfaces and volume. The position of the sample valve to the main valve body eliminates any question of its conformance to cGMP- 6D requirements while greatly reducing the dead leg to less than 2D, which is unachievable in other sample valve orientations. MATERIALS AND SPECIFICATIONS • 316L Stainless Steel, ASTM A479 wrought bodies, <strong>Pure</strong>-Flo main valve sizes 1.0" through 2.0" with 0.5" Bio-Tek ® integral sample valve. • Other size integral sample valves are available upon request, up to size of the main valve. • Standard ANSI 316L Stainless Tubing up to 4". • Assembly available with FDA compliant PTFE and EPDM diaphragms. • Interior surface finishes available with mechanical finishes from 11μ in. R a . Electropolish over mechanical services is also available. • PAS, stainless steel, nylon coated, PVDF coated or white epoxy coated manual bonnet assemblies are available. • Diaphragm driven pneumatic Advantage Actuators are available.
PURE-FLO ® ZERO STATIC “T” WITH INSTRUMENT PORT AND SAMPLE VALVE PURE-FLO ® ZERO STATIC “T” WITH INTEGRAL SAMPLE VALVE 19 PROCESS FABRICATIONS
Page 1 and 2: Pure-Flo ® Diaphragm Valves High P
Page 3 and 4: ITT Fluid Technology Corporation, U
Page 5 and 6: 3 INNOVATION
Page 7 and 8: T he integration of innovative qual
Page 9 and 10: FEATURES BENEFITS Adjustable Travel
Page 11 and 12: MANUFACTURING METHODS Castings: Pur
Page 13 and 14: ELECTROPOLISHING Electropolishing,
Page 15 and 16: BODY DIMENSION CHARTS ISO & DIN ISO
Page 17 and 18: PURE-FLO ® GMP ® 15 The GMP (Good
Page 19: PURE-FLO ® BIO-TEK ® ® PURE-FLO
Page 23 and 24: MODULAR VALVE ASSEMBLIES 21 21 The
Page 25 and 26: “TM” & #16 DIAPHRAGMS The intro
Page 27 and 28: BONNETS SIZE RANGE 1/2"-4"(DN 15-10
Page 29 and 30: MODULAR VALVE ASSEMBLIES LIST OF PA
Page 31 and 32: DIAPHRAGM DRIVEN Diaphragm-driven t
Page 33 and 34: 3”-4” SERIES 47 ADVANTAGE ® AC
Page 35 and 36: MODULAR VALVE ASSEMBLIES AIR TO OPE
Page 37 and 38: ADVANTAGE ® ACTUATOR A100 DIRECT A
Page 39 and 40: ADVANTAGE ® ACTUATOR A300 37 DOUBL
Page 41 and 42: ADVANTAGE ® ACTUATOR WEIGHTS & MEA
Page 43 and 44: ADVANTAGE ® SWITCH PACKAGE SP-2 41
Page 45 and 46: ADVANTAGE ® SWITCH PACKAGE SP-2.5
Page 47 and 48: ADVANTAGE ® SWITCH PACKAGE SP-3.0
Page 49 and 50: MANUAL BONNET SWITCH PACKAGE 2” P
Page 51 and 52: WFI POINT-OF-USE SCHEMATIC COLD Not
Page 53 and 54: ADVANTAGE ® ACTUATOR WITH POSITION
Page 55 and 56: FINE THROTTLING ; ;; ; ; ;; ; ; ; ;
Page 57 and 58: DIAPHRAGM GRADE TEMPERATURE MATERIA
Page 59 and 60: 1 Thermoplastic PAS (polyarylsulfon
Page 61 and 62: 1/2” TRI-CLAMP X SWICKLE BODY 3/8
Page 63 and 64: “Our customers have been more tha
Page 65 and 66: Valve Size A B C D E F G H I J Inch
Page 67 and 68: PURE-FLO ® DIVERT VALVES The paten
Page 69 and 70: LINE DRAWINGS 2-WAY DIVERT VALVE TO
Page 71 and 72:
PURE-FLO ® INTEGRAL CHROMATOGRAPHY
Page 73 and 74:
TOP VIEW SIDE VIEW FRONT VIEW TOP V
Page 75 and 76:
GENERAL ENGINEERING DATA VALVE SIZE
Page 77 and 78:
GENERAL ENGINEERING DATA PRESSURE/T
Page 79 and 80:
COMPLIANCE, APPROVALS AND VALIDATIO
Page 81 and 82:
Bonnet isolation, streamlined fluid
Page 83 and 84:
BONNET OPTIONS, DIAPHRAGMS, AND ACT
Page 85 and 86:
FABRICATION TYPE (Block BI) Code De
Page 87 and 88:
FIGURE NUMBERS 85 TYPE OF VALVE Opt
Page 89 and 90:
FIGURE NUMBERS MULTIPORT VALVE TOPW
Page 91 and 92:
STANDARD PURE-FLO FIGURE NUMBER BLO
Page 93 and 94:
88 TERMS AND CONDITIONS OF SALE CON
show all

Pure-Flo®

Create successful ePaper yourself

Delete template?

Save as template?