Manual - Surveillance System, Security Cameras, and CCTV ...

86
1.11.2 Setting Alert Notification
1. Click the Configure button (No.14, Figure 1-2), select General Setting, and select System
Configure. The System Configure dialog box (Figure 1-3) appears.
2. To change the default alert method, click the Arrow button in the Send Alerts Approach section,
and select E-Mail. See Figure 1-3.
3. To define the alert event, select Send Event Alerts in the Monitor Option section, click the Arrow
button and select events for which e-mail alerts will be sent. See Figure 1-66.
4. To send e-mail alerts when motion is detected, click the Camera Record Setting tab on the
System Configure dialog box, select Invoke to Send Alerts. You can select specific cameras for
this application or click the Finger button to apply the setting to all the cameras. See Figure 1-67.
5. Start monitoring. When the specified events or motion is detected, e-mail alerts will be sent out
automatically.
For related settings, see Send Alert Approach, Invoke to Send Alerts and Send Event Alerts earlier this
chapter.