Manual - Surveillance System, Security Cameras, and CCTV ...

2.5 IP Channel Setup
The setup procedures may vary slightly among IP camera, video server and compact DVR. The
following procedure is an example of setting up an IP camera in the system:
2
Hybrid and NVR Solution
1. Click the Configure button (No. 14, Figure 1-2), select General Setting, select Camera / Audio
Install and click IP Camera Install. This dialog box appears.
Figure 2-1
� To automatically set up an IP camera, click Scan Camera to detect any IP cameras on the
same LAN.
� To manually set up an IP camera, click Add Camera.
� To import IP cameras from the IP Device Utility, click Import Camera.
� To map IP devices through the GV IP Device Utility program, click IP Device Utility.
The following steps are the example of manual setup.
2. Click Add Camera. This dialog box appears.
Figure 2-2
3. Type the IP address, username and password of the IP camera. Modify the default HTTP port if
necessary.
123