Manual - Surveillance System, Security Cameras, and CCTV ...

604
11.16 GIS Recording
GV-System can record the video along with GPS data of its own and the connected IP devices. With
the recorded GPS data, you can view the recordings simultaneously with the GPS locations of
GV-System and connected IP devices on Google Maps, Microsoft Virtual Earth or self-defined maps.
If you are the user of GV-GIS monitoring station, the GPS data collected from either GV-System or
from connected IP devices can also be sent to the GV-GIS for central monitoring.
11.16.1 Setting the GPS Receiver
To record the GPS location data of GV-System, a GPS receiver with a USB connector is required to
connect to the local computer. Also, you need to run the GeoGISClient program in the background to
receive the GPS data from the GPS receiver.
1. Run GeoGISClient.exe from the GV folder. This dialog box appears.
Figure 11-90
2. To add the GPS receiver to the GV-System, click the
This dialog box appears.
button and click the GPS Receiver tab.
Figure 11-91